Ceiling Adaptor
-
VMP Suspended Ceiling Mounting Adaptor White (SCM-1)
close
An suspended ceiling mounting kit which can accommodate 1.5 NPT pipe as well as the standard mast included with any VMP mount with a load capacity under 75 lbs. Works with any mount which accepts 1.5 NPT. Key Features Suspended ceiling tray for ceiling mounts Suitable for any VMP ceiling mount using a 1.5 NPT pipe Tie wire turnbuckles and attachment hardware included All VMP products offer the Forever Warranty (excluding fans which have a ...
-
VMP Small Flat Panel Ceiling TV Mount Adaptor Kit (AK-2)
close
The AK-2 is the adapter kit for LCD-1CB mounts. This adapter allows the mount to accept standard 1 NPT plumbing pipe. It can be used when the desired pipe length from the ceiling to the mount exceeds 60. This adapter kit has a 200lb load capacity to ensure stability. Key Features Allows the LCD-1CB mount to accept a standard 1 NPT plumbing pipe Generally used when the pipe length from ceiling to the mount exceeds ...
-
VMP Black Truss Ceiling Mount Adaptor (TCA-1)
close
The Truss Ceiling Mount Adaptor is a ceiling mount adaptor designed to attach ceiling mounts to a wide variety of trussing or pipe. Capable of adapting up to a maximum diameter of 3 or maximum cross-section dimensions of 3 x 3 the TCA-1 will accommodate most common pipe and trussing cross sections. Designed to work with VMPs proprietary masts as well as industry standard 1.5 NPT pipe the mount adaptor is perfect for your ceiling ...
-
VMP Small Dual Flat Panel Ceiling Mount Adaptor (LCD-CM2B)
close
The Dual Ceiling Mount Adapter allows the LCD-1CB to accommodate two 10 to 23 flat panels back to back. This has an adjustable tilt from -5 to 20. It has a combined load capacity of 50lbs and is finished with a black powder coat. Key Features Adapts a LCD-1CB (sold separately) to accommodate a second flat panel with 75 or 100mm VESA hole patterns Holds 10 23 flat panels Adjustable -5 to 20 tilt Rotates ...
-
VMP Flat Panel Ceiling Mount Adaptor for the VH-001 Silver (VH-004)
close
The VH-004 is an adaptor to allow an electronic component holder to be hung underneath a VMP flat panel ceiling mount. Combined with the VH-001S the adaptor allows for adjustable drop distance so your electronic component can be just below your ceiling mounted flat panel. Key Features Allows VH-001 to be hung below VMPs flat panel ceiling mounts Drop adjustment of 6 to 17 Has a silver powder coat finish All VMP products offer the ...
-
VMP Black I-Beam Ceiling Mount Adaptor (IBA-1)
close
The I-Beam Adapter is an easy to use device to adapt any VMP ceiling mount to an I-Beam. It can also be used with other mounting brands that use a 1.5 NPT pipe. Key Features Adapts ceiling mounts to clamp to an I-Beam Works with all manufacturers mounting systems when using 1.5 NPT pipe Has a 250-pound load capacity Accommodates 2.25 to 12 flange widths Accommodates maximum flange height of 1 All VMP products offer ...
-
VMP Unistrut Adaptor (UA-1)
close
The UA-1 is an easy to use device to adapt any VMP ceiling mount to a piece of Uni-strut. It can also be used with other mounting brands that use a 1.5 NPT pipe. Key Features Adapts ceiling mounts to work with 1.625 Unistrut Works with all manufacturers mounting systems when using 1.5 NPT pipe Has a 180-pound load capacity Features a black powder coat finish All VMP products offer the Forever Warranty (excluding fans ...