Perfect Vision Mount
-
Perfect Vision DIRECTV Satellite Dish Under-Eave Mount (SLMTUE)
close
This Perfect Vision under-eave mount is used to install your DIRECTV satellite dish under the eave of your roof. This DIRECTV satellite mount is ideal for homes with inadequate mounting areas such as tile roofs stucco-sided homes etc. These mounts have a two-inch outer diameter and can clear up to a 30 eave and 30 clearance for height. Solid Signal is your source for the Perfect Vision under-eave mount and other DIRECTV dish mounting options. ...
-
Perfect Vision NPR8 Non-Penetrating Flat-Roof Mount (NPR-8)
close
This new mount has been engineered to fit a majority of the DTV mounts and accommodate any bracing needs. This new mount has been engineered to fit a majority of the DTV mounts and accomodate any bracing needed. Ballast with eight concrete blocks. Optional side mounted wind leg can be mounted also. Fits the SLP-F 18DISH 1820 DISH and DTV66E series antennas. Also fits most 18 and 24 oval dishes. Drill custom clearance hles for ...
-
Perfect Vision Non-Penetrating 18inx24in Satellite Dish Roof Mount (NPR5)
close
The Perfect Vision non-penetrating mount is the perfect solution for mounting your 18x24 satellite dish without puncturing the roof. This non-penetrating satellite antenna roof mount comes with a set of attachment bolts. The unit requires six concrete blocks (not included) for ballast. Solid Signal is your source for these Perfect Vision non-penetrating antenna mounts. Key Features For use with 18x24 satellite dishes Angle-iron frame Powder-coated for corrosion resistance Uses six standard ...
-
Perfect Vision Non-Penetrating Antenna Mount for 2-3/8in O.D. Mast (NPR4A)
close
This Perfect Vision non-penetrating antenna mount is used to house a 2-38 O.D. mast (not included). This 36 by 36 non-penetrating base mount is best used on flat roofs where people cant drill into the roof to secure the mount. To secure this antenna mount simply add eight cinder blocks to the mounts metal frame. Perfect Vision Manufacturing makes TV antennas connectors and other accessories for the telecommunications industry. Solid Signal is your source for ...
-
Perfect Vision 3 ft Tripod Mount and 28 inch 1 5/8" Mast (PVTP3158KIT)
close
Heavy-duty 3 foot galvanized satellite tripod includes a 28 mast with 1 58 O.D. but tripod will hold up to 2 Mast. 3 ft rooftop tripod wcup 28 inch Mast with 1.66 inch O.D. 18 Gauge Steel Includes Tripod mast to mount off-air antenna or satellite antenna (3) 15 inch Nails (6) 516 inch Bolts and (12) Nuts Supports mast up to 2 in. diameter
-
Perfect Vision PVTP3 3 ft Roof Top Tripod Mount (PVTP3)
close
Heavy-duty 3 foot galvanized tripod. For use with 1 34 O.D. mast. Mounts TV antennas or a 18-32 dish. Even better This product now includes a Bonus 28 mast Manufacturers may vary depending on availability Lag bolts and pitch pads not included 3 ft rooftop tripod wcup 30 leg span
-
Perfect Vision PVTP3 3 ft Roof Top Tripod Mount (KIT-PVTP3)
close
Heavy-duty 3 foot galvanized tripod. For use with 1 34 O.D. mast. Mounts TV antennas or a 18-32 dish. 3 ft rooftop tripod wcup EZP10 Pitch Pad Kit Included 4-padscrew 1 Inch x3 Inch
-
Perfect Vision 2ft Roof Top Tripod Mount (PVTP2-2)
close
2 foot galvanized tripod. For use with 2 Inch O.D. mast. Mounts TV antennas or a 18-32 Inch dish. When fully extended legs are approximately 20 apart. 2 ft rooftop tripod wcup
-
Perfect Vision Non-Penetrating 1.75 and 2 in. Mast (NPR-6B)
close
This adjustable non-penetrating roof mount is designed for the slim line and the international dish. The mast is reversable for easier installation with a 1 34 OD on one end and a 2 OD on the opposite end the installer simply selects the diameter when assembling the frame. No holes need to be drilled in the roof surface this avoids reluctance by building owners and reduces the possibly of roof leaks. The total weight of ...
-
Perfect Vision Small Satellite Dish Eave Fascia Board Mount (EVEMNT)
close
This Perfect Vision satellite dish eave mount quickly and easily attaches satellite dishes to fascia board and roof overhangs. This device allows you to mount a small satellite antenna like an 18 to the angled fascia of a house. The fascia board needs to be sturdy and well secured to the rafters so the EVEMNT plate does not wobble. The larger plate (six holes) bolts to the fascia board and the smaller plate (eight holes) ...
-
Perfect Vision EZ2924S "Y" 12 Ft Chimney Mount (PVCM24)
close
Get the right equipment for your antenna installation project. Install your TV antenna with a leading antenna mount. Let Solid Signal guide you on how to install TV antenna equipment. Y-Type Antenna Chimney Mount with 12 ft straps. -- Includes two Y brackets and two 12 foot galvanized straps Holds up to a 1 12 Inch Mast
-
Perfect Vision PVWB6 6in Y-Type Wall Mount (PVWB6)
close
The Perfect Vision Y-Type wall mount provides a 6 clearance to the antenna mast and is a good way to keep your antenna stable. Ideal for mounting 1.25 O.D. masts to side of a building wall. Key Features U bolt mast holder with 6 clearance Accommodates 1.25 to O.D. for masts typically used for TV antenna radio and some satellite applications Great for installs where you dont want to drill into a roof but still ...
-
Perfect Vision 4in W-Type Wall Mount (PVWB4)
close
Antenna installation is easy when you have the right equipment. The best antenna mount can now be yours. Want to know how to install TV antenna equipment Partner with Solid Signal today. Attach antenna mast (1.25 dia.) to the side of houses or other structures. 4 W-type wall mount Mount includes two brackets