Availability: Usually Ships Same Day Condition:New
Your Price: $999
List Price: $49.99
A Classic Remote with Modern Features
Get the classic DIRECTV remote control, now with the ability to work through walls, floors, and beyond. The RF capability is an improvement over IR, which works through line of sight. Tuck away equipment in closets or cabinets without losing control.
Key Features of the IR/RF Universal Remote
RF capable universal remote: works from anywhere within the specified range
Memory protection feature keeps all your device history during battery replacement
This unit operates on IR and RF frequencies, for max compatibility
Works great as a universal remote, controlling up to 4 devices, including a DTV receiver
Powered by 2 AA batteries, included
Extensive device code library ensures compatibility with most audio/video devices
This RCIRRF is a great replacement remote for most DIRECTV receivers. The RCIRRF works with D10, D11, D12, R15, R16, R22, HR44 Genie, HR54 Genie, HS17 Genie 2 (or later), C41, C51, C61, C61K, C41W, C61W Genie Client (or later), or any GE, Philips, Sony, HughesNet, Mitsubishi, or RCA receivers only in IR mode. The RF mode compatible receivers are HR34 H25, H24 HR24, HR23, H23, HR20 HR22, H20, HR21, H21, R15, R16, and more. This remote is also an upgrade and replacement for several DIRECTV remotes. It replaces the RC65RX, RC66RX, RC65R, RC65RXMP, RC21, RC24, RC30 and RC64 remote controls.
Easily check battery strength on your remote. Hold down any button and looking for a solid green light, indicating full strength. You'll see a fast blink for medium, and a slow blink or no light indicates the batteries should be replaced.
The biggest cause of remote not functioning correctly is also the easiest to fix! Before trying any other troubleshooting make sure the top slider is set to the device you want to control.
Pro Tip: Pressing the 'DOWN ARROW' twice lets you buffer two programs at the same time
Press and hold 'INFO' to run a system test on your H25, H24, or older receiver
This remote operates on Infrared (IR) and Radio Frequency (RF)
Infrared remote controls uses patterns of light to control devices. Because they use light, they require a line of sight, and will NOT work through wall or floors. This is the standard technology for remote controls since the beginning.
Radio Frequency enabled remotes, unlike IR, can go through walls, and floors. They also work great for setups where one receiver is feeding multiple TVs.
This remote has the ability to switch between the two functions (IR/RF)
Frequently Asked Questions
Q. Will this enable me to operate both my DIRECTV receiver with one remote? A. No, this remote can only be paired with one receiver at a time.
Q. Can this remote go through walls and floors? A. Yes, if you are using this on an RF Enabled receiver (C31, H20, H21, H23, H24, HR24, HR20, HR22, HR21, HR23, HR34, and H25)
Q. How many devices can I control with this? A. Four, including the DIRECTV receiver.
* These receivers require an RF antenna to use RF enabled remote. Other models listed have RF antenna built in.
Here are available downloads related to this product:
NextGen IR to RF Remote Signal Conversion Extension
This is the easiest and least expensive way to add
RF to any remote! This NextGen product features an RF transmitter in the form of a battery. It is conveniently placed in your remote’s battery compartment, replacing one of ...
NextGen 418 MHz Remote Control Signal Extender Multi-Room
The NextGen 418 MHz remote control extender turns your infrared
remote into a digital RF remote. This let you operate your stereo, TV, cable, satellite, DVD player, or VCR through walls and doors. It’s easy set-up and works with ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).