Availability: Usually Ships Same Day Condition:New
Your Price: $140
List Price: $411.98
The B-Band Converter module is designed to allow DIRECTV receivers and DVRs to operate using legacy (non-SWiM) dishes like the AT9 and original Slimline dishes. Required for the following: HR20, H21, H23, HR21, HR22, H24 and HR24. Not required for HR23. H25 and HR34 receivers cannot be used with legacy dishes.
Ka LNB frequencies are between 250Mhz and 750Mhz
BBC up-converts the B-Band into a 1650-2150Mhz usable spectrum
The HR20 requires two B-Band converts, one for each tuner
This unit is required to receiver the 150 HD stations this fall
B band converters are only required where there is no swm8 multi-switch present
Includes 20 pieces
Enables H20 H24, HR24 and HR20 receivers to receive upcoming HD programming.
How do I know if I need a B-Band Converter?
The easiest way to tell if your H20 or HR20 receiver has the BBC connected to it is to look at the back of the receiver. Look for a module that looks like the one pictured to the right.
If you cant access the back of your receiver and you have an HR20 receiver, tune in to the BBC test channel — number 499. If you get a message that reads "Searching for signal on Satellite In," youll be able to enjoy new HD channels from DIRECTV as they become available. If you see the message "Important HD Information. Your B-Band Converter module is NOT connected," you do not have the BBC or it is not connected properly.
For certain models of the H20 or HR20 receivers and/or previous generation satellite dishes or if you live in Alaska or Hawaii, you may see a gray or blank screen when you tune in to channel 499. In this case, DIRECTV will have to verify your equipment setup to determine if you need a BBC.
Two BBC modules are
required for the HD DVR receiver model HR20. Insert the black, cabled
ends of the BBC into the "Satellite In" inputs on the back panel of the
receiver. Connect the other ends of the BBC to the cables running from
your DIRECTV HD-capable dish.
Connect it as shown:
Insert the black, cabled end of the BBC into the "Satellite In" input on
the back panel of the receiver. Connect the other end of the BBC to the
cable running from your DIRECTV HD-capable dish.
DIRECTV Wireless DECA Ethernet Over Coax Adapter (CCK-W)
Check out DIRECTV's all-in-one solution for providing wireless connectivity for
those who do not have a coaxial connection near their home network. It combines the function of a traditional wireless networking adapter and a Broadband Cinema Connection Kit. Compatible ...
Cabletronix Digital/Analog Signal Level Meter (CTDLM870D)
The CT-DLM870D is a handheld signal level meter is designed
to provide the most valuable features at reduced cost. It performs fast and efficiently to take carrier amplitude measurements. It can also take the direct power measurement of DVB ...
DC Power supply, 20VDC, 1.5A Output, 100-240V 50/60Hz input, UL
Listed, RoHS Compliant, perfect for use as the LNB power supply for a SWM-32 single wire multiswitch, also designed to power the PI-6S polarity locker and the SA-6AL six ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).