Solid Signal > Commercial Equipment > Modulators and Demodulators > Magewell 11040


Magewell Pro Capture HDMI Card (11040)
Magewell Pro Capture HDMI Card (11040)
Magewell Pro Capture HDMI Card (11040)
Magewell Pro Capture HDMI Card (11040)
Magewell Pro Capture HDMI Card (11040)

Click Images to Enlarge

Magewell Pro Capture HDMI Card (11040)

Brand: Magewell           P\N: 11040           UPC: 8143950200310

No Reviews Available  Be the first to write one!


Availability: Usually Ships Same Day
Condition: New


Your Price: $299


List Price: $349.00




Qty:


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Magewell The Pro Capture HDMI Card from Magewell is a low-profile PCIe x1 card that allows for capturing a single channel of HDMI input. It supports capturing of component plus audio, composite plus audio, and S-video plus audio via the included DB-9 breakout cable, and HDMI plus embedded audio via the HDMI port. The card also supports multiple color sampling modes, 10- and 12-bit color depths, up to 8 audio channels at 48 kHz, and output resolutions up to 2048x2048 with frame rates up to 120 fps. It is also capable of numerous video processing features, including cropping, scaling, de-interleaving, aspect ratio conversion, color format conversion, video frame rate conversion, and video OSD composition.

Pro Capture HDMI Card supports multiple cards per system and unlimited output streams with independently adjustable parameters per stream. Additional features include ultra-low latency, timestamp and A/V synchronization, and LED status indicators. The card supports Windows, Linux, and Mac operating systems, multiple APIs for Windows and Linux, and provides Windows SDKs for easier integration.

Key Features
  • 225 MHz HDMI receiver
  • Adaptive HDMI equalizer support for cables lengths up to 98'
  • Supports customized EDID


Features


  • Supports extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames

  • Full colorimetry support

  • Supports 8/10/12-bit color depths

  • Supports RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

  • Supports up to 8-channel IEC60958/IEC61937 audio streams

  • Supports extraction of audio formation information & channel status data, video timing, 3D format information, and Sony/Canon DSLR time code

  • 12-bit ADC

  • Supports RGB & YCbCr (YUV) color formats

  • Supports Separated sync, Composite sync, Sync-on-green (SOG), Sync-on-luminance (SOY)

  • Supports DMT, CEA, CVT, GTF video timings

  • Input signals up to 165 MHz pixel rate are digitized with 1:1 sampling whereas those over 165 MHz can be digitized with horizontal sub-sampling (resulting in some image quality loss; not officially supported)

  • Auto detection of RGB & YCbCr color formats

  • Auto or manual sampling phase adjustment

  • Auto horizontal alignment

  • Supports customized video timings and customized video resolutions for CVT/GTF timings

  • 12-bit ADC

  • Supports NTSC, PAL, and SECAM standards

  • Auto detection of video input standard

  • Two video processing pipelines with approximately 180MP/s processing bandwidth for each

  • Supports full 10-bit video processing

  • Video cropping and scaling

  • Video de-interlacing (wave, blend top & bottom, top field only, bottom field only)

  • Aspect ratio conversion: Automatic or manual selection of input and output aspect ratios - Three aspect ratio conversion modes: ignore (anamorphic), cropping, or padding (letterbox or pillarbox

  • Video color format conversion: Automatic and manual selection of input/output color format, quantization ranges, and output saturation range - Supports RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats - Limited or full quantization range - Limited, full, and extended gamut saturation range

  • Video frame rate conversion

  • Video OSD composition: PNG OSD image of up to 2048x2048 - Dynamic loading of RGBA OSD image via SDK

  • Supports multiple cards plugged into one system

  • On-board rotary switch to set card number, with 16 positions from 0 to F

  • System hardware device tree will display "01: Pro Capture AIO" when rotary switch is set to 1, and so on

  • The video and audio device names displayed in your software will include the card number (set by the rotary switch)

  • Unlimited output streams for any one input channel

  • Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing, and color adjustment settings for each individual stream

  • Latency of 64 video lines

  • Partial notification mode in SDK

  • Hardware-based 100ns high-resolution clock

  • Audio frames (192 audio samples) & video frames are stamped with hardware clock

  • Hardware clock can be synchronized across cards (via SDK)

  • Supports auto detection of Intel tiled GPU surface

  • Supports DirectGMA for AMD video adapter chipsets

  • Supports GPUDirect for NVIDIA video adapter chipsets

  • 400 MB/s per channel DMA bandwidth in a PCIe 2.0 system

  • 200 MB/s per channel DMA bandwidth in a PCIe 1.0 system

  • Pro Capture SDK for DirectShow for easy integration (Windows) - Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

  • All options can be controlled by three levels of registry key: global level, product level, and device level Video, audio, crossbar filter names can be customized via registry keys

  • Multiple cards in one system can be upgraded simultaneously

  • Cards can be upgraded without a system power shutdown when it is not in use

Specs


Supported OS

Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)
OS X 10.9–10.11
MacOS 10.12

Supported APIs

Windows
– DirectShow
– DirectKS
– Wave API/DirectSound/WASAPI
Linux
– V4L2
– ALSA

Supported Software

VLC
VirtualDub
OBS
xSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software

Input Interfaces

HDMI type A
– DVI 1.0
– HDMI 1.4a
DB9
– YC (S-Video)
– Composite video
– Analog audio (L+R)
– Component video

Host Interface

PCIe Gen2 x1

Input Features

Auto scan of video input sources when there is no signal input to the currently selected input source
Manual selection of video input source
Auto selection of linked (embedded) audio input source when the video input source changes
Manual selection of audio input source
Support for standard crossbar based on video input source selection
Support for input video resolutions up to 2048×2160 pixels

Component Specific Features

12-bit ADC
Support for RGB & YCbCr (YUV) color formats
Support for ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)
Support for DMT, CEA, CVT, GTF video timings
Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss – NOT officially supported)
Auto detection of RGB & YCbCr color formats
Auto or manual sampling phase adjustment
Auto horizontal alignment
Support for customized video timings
Support for customized video resolutions for CVT/GTF timings

HDMI Specific Features

225MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for 8/10/12-bit color depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for up to 8-channel IEC60958/IEC61937 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode

YC & Composite Specific Features

12-bit ADC
Support for NTSC, PAL and SECAM standards
Auto detection of video input standard

Video Capture Formats

Support for capture image resolutions up to 2048×2160 pixels
Support for capture frame rates up to 144fps. (Actual capture frame rate can be limited by PCIe bandwidth, and at higher image resolutions – above 1280×1024 – by the pixel clock of the on-board video processing hardware. eg. Max frame rate at 1920×1080 = ~80fps. )
Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
Support for 4:4:4 10-bit capture formats: V410, Y410
More capture formats are supported via Pro Capture SDK for DirectKS

Video Processing Features

Two video processing pipelines with ~180Mpixels/s processing bandwidth for each one
Full 10-bit video processing
Video cropping
Video scaling
Video de-interlacing
– Weave
– Blend top & bottom field
– Top field only
– Bottom field only
Video aspect ratio conversion
– Auto or manual selection of input aspect ratio
– Auto or manual selection of capture aspect ratio
– Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
– Auto or manual selection of input color format & quantization range
– Auto or manual selection of capture color format, quantization range & saturation range
– Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
– Support for Limited or Full quantization range
– Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Video OSD composition
– Support for PNG OSD image (up to 2048×2160)
– Support for dynamic loading of RGBA OSD image via SDK

Multiple Cards per System

Support for multiple cards plugged to one system
On-board rotary switch to set card number, with 16 positions from 0 to F
System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on
The video and audio device names displayed in your software will include the card number (set by the rotary switch)

Multiple Capture Streams

Unlimited capture streams for any one input channel
Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream

Ultra Low Latency Support

Latency of 64 video lines
Partial notification mode in SDK

Timestamp & A/V Synchronization

Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA

~400MB/s per channel DMA bandwidth in PCIe 2.0 system
~200MB/s per channel DMA bandwidth in PCIe 1.0 system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets

SDK

Pro Capture SDK for DirectShow for easy integration (Windows)
Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

Windows Driver Tweaks

All options can be controlled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys

Firmware Upgrade

Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown when it is not in use
Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above.

LED Indicator

Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

Form Factor

Low profile PCIe x1 Add-on Card
92.76mmx68.88mm (without PCI bracket)

Accessories

DB9 to YC + Composite + Analog Audio + Component breakout
Low Profile bracket

Power Consumption

Max current at 12V ~0.34 A
Max current at 3.3V ~0.16 A
Max power consumption ~4.59 W

Working Environment

Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing



Discuss





RELATED SEARCHES







Product Reviews for Magewell Pro Capture HDMI Card (11040)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



  RELATED PRODUCTS
Related Products
The flexible, modular design of the HDbridge3000 provides 12 media ...
This Ideal 85-366 CAT-6 Modular Plug Cards, 25-Pack provides easy ...
Single card encoder modulator system for digital satellite news gathering ...


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2019 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail