The ROHN R-25GBRM is a non-penetrating roof mount designed to support ROHN model 25G tower sections. The mount is able to support two (2) sections of 25G tower in a self-supporting application. The base of the mount covers 10-ft & sup 2 and is equipped with a 16-in tray designed for the concrete blocks typically used as ballast. Use of a rubberized support mat is recommended underneath the roof mount.
This item ships LTL. You will be emailed a questionnaire after placing an order.
Description: ROHN 25G ballast roof mount
Rooftop Mount Application: Non-Penetrating
Rooftop Mount Type: Tripod
Mounting Pipe Diameter: 4 in
Item Height: 24 in
Item Width: 120 in
Mfg. Warranty: 1 Year
Additional shipping fees may apply. A Solid Signal Rep will contact you for shipping instructions
The ROHN R-25TDM25S3KD top dish mount kit for model 25G
towers includes top and bottom mounting plates and all necessary hardware to connect the plates to a ROHN 25G tower section.The top plate, which bolts to the swaged top ...
Trylon 46185101001 Trylon STG Flat Roof Mount (46185101001)
The Trylon 46185101001 STG flat roof mount is designed for
use with standard STG guyed tower sections. The hot-dip galvanized steel mount has three bolts that feed into the splice spigots of the STG section. Once the tower sections ...
The ROHN R-55TDM25S3KD top dish mount kit for model 55G
towers includes top and bottom mounting plates and all necessary hardware to connect the plates to a ROHN 55G tower section.The top plate, which bolts to the swaged top ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).