Why be limited with the number of inputs your TV or receiver has? With this switch, you can plug in more sources than your TV or receiver can handle alone. Add flexibility to your existing audio/video system, or quickly connect multiple gaming systems. This solution is for the a/v hobbyist who wants to take full control of an ever-expanding system while adding flexibility and trouble-free cable management.
- 4 x RCA Female Audio/Video In
- 4 x Female S-Video In
- 2 x RCA Female Audio/Video Out
- 2 x Female S-Video Out
This unit allows you to feed up to 4 stereo
audio and video sources to one unit (normally one television which has A/V
It also allows you to connect a second device such
as a portable recorder or amplified loudspeakers to the front AUDIO only output
The two outputs are always
There are four switches on the top of the unit which
allow you to select which of the four inputs you want to
Since this is a passive device (no AC or batteries) the
input which you select is indicated by a red mark (non-illuminated) which
appears when you select the input.
This unit is a perfect
solution if you have a receiver or amplifier with no video switching or without
enough video switching (or with no S-video
Cables are not provided so you will need to
purchase the appropriate cables.
Placing the unit directly
on top of a TV could cause electromagnetic interference. If this occurs simply
move the cables and/or the switch box.
S-video signals will
only be output when a corresponding S-video signal is connected to the input.
For example, if you connect a standard VHS VCR to input 1 using composite
video, only composite video (not S-video) will be output from Output
Only output #1 should be used for dubbing or editing, since
recording levels will drop if you use both Output #1 and Output #2