RapidRun™ is known for its versatility, convenience and ease of installation. However, even the most experienced installers will run into hazards that damage or kink the cable during installation. Problems associated with damage during installation are seldom found until the final phase of the installation when the cable is already enclosed in the wall.
The Runner Cable Test Adapters are separately available for Multimedia (blue) Runners, PC (yellow) Runners, and Digital (red) Runners.
Instructions For Use:
Attach the modified RapidRun connector to the display end of the Runner cable.
Connect the network tester to the source end of the Runner cable using the RJ45 adapter cable.
Run a continuity test on the cable.
Pins 4 and 5 should show as a short on the test readout.
If you do not get this readout, please contact your RapidRun sales representative for assistance.