The Wilson Pro 1050 features a unique dual-amplifier system designed to compensate for signal loss caused by long cable runs. Signal loss or “attenuation” occurs over all kinds of coaxial cables. The longer the cable run, the more significant the loss will be. Using high-quality cable designed for long runs, like Wilson400, reduces this loss, as does running cable through walls and ceilings to keep cable length as short as possible. Nevertheless, some loss is inevitable.
The Wilson Pro 1050 aims to greatly reduce this by using a dual amplifier system composed of a main signal booster and a supplementary inline booster. The Pro 1000 main amplifier unit boosts the signal first and communicates with the inline Pro 1050 booster. The two amplifiers work together to determine the actual signal bleed along the cable run, and supply sufficient boost to compensate for this lost signal.
Expected Indoor Coverage
15,000 sq. ft. with 1-2 bars (-100 dB) of outside signal 45,000 sq. ft. with 3-4 bars (-90 dB) of outside signal 75,000 sq. ft. with 5 bars of outside signal
The Pro 1050 signal booster system has been tested and approved by the Federal Communications Commission (FCC) to compensate for cable-run signal loss without exceeding the maximum-allowed system gain. The Wilson Pro 1050 uses the strongest downlink power permitted by the FCC to provide the largest possible indoor signal coverage. The new Wilson Electronics XDR (Extra Dynamic Range) technology balances and compensates for strong incoming signal to prevent system shutdowns. The Pro 1050 is ideal for large installations that use long lengths of coaxial cable. It supports multiple simultaneous users, and it supports all cellular devices. It boosts 2G/3G/4G/LTE voice and data on all US cellular networks.
Boosts 3G & 4G LTE up to 75,000 sq. ft.
Works for all phones & cellular devices
Complete kit: all parts included, easy install
XDR technology that prevents signal overload and booster shutdown
Great for large mulit-story buildings, industrial warehouses, factories, hospitals, hotels, venues, and other large office spaces
WARNING. This is a CONSUMER device. BEFORE USE, you MUST REGISTER ANY CONSUMER SIGNAL BOOSTER with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Kit Includes: WilsonPro 1050 Two-Part Booster System, Wide-Band Directional Outside Antenna and 75-foot Wilson 400 cable, Dome Indoor Antenna and 100-foot Wilson 400 cable, 100-ft and 2-ft Wilson 400 Cable, and a Lightning Surge Protector
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).