Solid Signal > Commercial Equipment > Antenna Towers > Trylon 4950607000
The Trylon 4.95.0607.000 T600 TITAN 64-ft self-supporting tower is ideal for lightweight, commercial duty tower applications like those found in internet service and SCADA networks. The TITAN model 4.95.0607.000 tower is survival-rated only and does not meet EIA design standards.
- Mfg. Warranty: 1 Year
- Additional shipping fees may apply. A Solid Signal Rep will contact you for shipping instructions.
- GSA: Contract
- Special Order Product. Non-Returnable.
Since its introduction in 1977, the TITAN Self-Support Tower has been used in over 15,000 successful installations across North America. Applications include telemetry, satellite TV, wireless LAN, wireless Internet, mobile radio and amateur radio. The TITAN self-supporting tower is a modular, pre-engineered system available in heights up to 96 ft. (28.8 m). The system consists of 12 different 8-ft (2.4 m) sections designed to interlock with one another. Material used for all members is formed, pre-galvanized steel sheets with a minimum yield of 35,000-psi. The diagonal members are installed at a shallow angle, allowing them to be climbed. The tower members are graded out with a high degree of finesse, producing a very cost-effective, high-strength tower. The Trylon TITAN towers are designed for failure ratings only and are not designed per EIA/TIA standards which allow for additional safety factors in the design. All antenna loadings shown represent maximum failure loadings with a "N/A" denoting tower failure at the corresponding wind speed. TITAN towers are not designed for heavy commercial applications. For Trylon self-supporting towers that meet both EIA and TIA design guidelines please see the SuperTITAN.
The 4.95.0607.000 64-ft tower kit includes all of the 8-ft tower
sections youll need to assemble the complete freestanding structure.
- Tower Series: T600
- Leg Type: Angle
- Leg Connection: Splice plates
- Engineering: Pre-engineered
- Climbing Application: Incorporated into tower face
- Tower Type: Self-Supporting
(1) 4.95.0062.000* Tower top section #6 with
1.9-in OD x 8-ft pipe (includes angle frames and U-bolt
(1) 4.95.0071.000 Tower section #7
4.95.0081.000 Tower section #8
(1) 4.95.0091.000 Tower section
(1) 4.95.0101.000 Tower section #10
4.95.0111.000 Tower section #11
(1) 4.95.0121.000 Tower section
(1) 4.95.0131.000 Tower section #13
4.81.0114.000 Anchor stub leg #14 for concrete embedment
necessary splice hardware for connecting the sections
*To support the mounting pipe, every top
section is factory-installed with angle frames and U-bolts at the top
and middle of the section.
Tower height shown is
nominal. Actual tower height is achieved using the support pipe supplied
with the tower.
Normal soil foundation designs are
found below in the Attachments section. Geotechnical surveys are always
recommended prior to any tower installation.
You May Also Consider
Product Reviews for Trylon 4.95.0607.000 TITAN 64ft T600 Self-Supporting Tower (4.95.0607.000)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!