Isolate and eliminate noise caused by a ground loop in an audio circuit with this Four-Channel Ground Loop Isolator. The isolator ensures that the shield ground on each audio cable is isolated from any equipment ground which could cause audible noise when amplified. This device has four channels composed of two pairs of stereo (L+R) inputs and outputs.
The nominal DC impedance of the device is 100 ohms and the audio impedance is 3500 ohms at 1000 Hz
The unit measures 100 x 50 x 22 mm and both the input and output leads measure 9" in length
Each of the RCA plugs and jacks is gold-plated to ensure smooth corrosion-free connections
The nominal input power is 50 watts with a maximum power level of 100 watts
Interior panels vibrate and generate noise. Boom Mat XL Damping
Material stops that noise by trapping it between thick, 4 mm aluminum stiffened top skin and the asphalt-free, pure butyl, noise-constraining layer. Plus Boom Mat has worry-free, no sag ...
METRA- 70-5521 2003 and Up Ford Amplifier Integration/Sub
The Metra Ford Amplifier Sub Harness 70-5521, features OEM-quality terminals
for the most secure connection between terminals and connector. Pre-stripped ends allow for easy connections high impact ABS OEM quality plastic molded connectors provide perfect fit color-coded set of ...
iSimple BluClik Bluetooth Remote Control with Steering Wheel
Control your Bluetooth-enabled Apple® or Android device using this iSimple
BluClik ISBC01 remote that features wireless playback, volume and VR controls for easy operation. The included steering wheel and dash mounts facilitate vehicle installation.. Features. Compatible with most Bluetooth-enabled ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).