Solid Signal > Marine Equipment > Marine Electrical Accessories > R & D Marine 800-014


R & D Engine Mount 4

Click Images to Enlarge

R & D Engine Mount 4" Footprint 300-680lbs Capacity Per Mount (800-014)

Brand: R & D Marine           P\N: 800-014           UPC: 839662003469

No Reviews Available  Be the first to write one!


Availability: Usually Ships Same Day
Condition: New


Your Price: $9280


List Price: $116.80




Qty:


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Engine Mount with 4" Footprint - 5/8" Stud - 300-680lbs Capacity Per Mount, The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull. To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products. R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.

How To Select (details required):
1.Define the total weight of the engine and the transmission.
2.Determine 60% of the total weight and then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the tranmission side of the engine).
3.Determine 40% of the total weight and then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the tranmission side of the engine).
4.Determine the stud necessary stud diameter and footprint of the mount.
5.Choose mount most appropriately sized for the per mount weight. When possible, choose the mount nearest the middle of the weight range.

Example:
Engine weight is 480lbs., transmission weight is 110lbs., footprint is 4", stud diameter is 5/8".
Total weight is 590lbs.
590 x .6 / 2 = 177 lbs per rear mount. Mounts required are 800-010
590 x .4 / 2 = 118 lbs per rear mount. Mounts required are 800-037





Discuss





RELATED SEARCHES







Product Reviews for R & D Engine Mount 4" Footprint 300-680lbs Capacity Per Mount (800-014)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



  RELATED PRODUCTS
Related Products
Voyager Compass:. 3" PowerDamp Flat Dial,Adjustable and Removable with Bracket ...
Navigator Compass: 4-1/2" Ritchie CombiDial and Built-in Clinometer, Easily Installed, ...
Helmsman Steel Boat Compass: 3-3/4" PowerDamp Dial, Special Reinforced Bracket ...


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2017 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail