Solid Signal > Cell Phones and Accessories > Cell Phone Signal Boosters and Amplifiers > Wilson Electronics 804006
Wilson Electronics 804006 Wireless In-Building Cell Phone Repeater for Nextel and iDEN (60 dB) (804006)
Brand: Wilson Electronics
No Reviews Available
Be the first to write one!
The new series of Wilson amplifiers feature smart technology and reduce interference (806-866 MHz).
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Improve the signal of your cell phone
- Compliant with Cell Models on the 806-866 band
- Antennas must be 75 feet apart (60 feet if roof is constructed of metal or concrete)
- Includes a Two-year Manufacturer Warranty from Date of Purchase
- Wireless system allows multiple users to operate on amplifier at one time
- Greater than 60 dB computer controlled adjustable AGC dynamic range
- Automatic Gain Adjusting in the event of oscillation and/or overload
- Automatic shutdown on overload
- 2 dB Gain Steps 30-60 dB
- CDMA/rho > .912
- TIA/EIA-98-E 3.5.1 Receiver
- LED Indicators: Power, Oscillation and AGC
The Wilson Cellular Amplifier / Repeater has
a better receiver than whats in your cellphone. Its advanced electronics are
very sensitive and able to receive small signals which would go undetected by
most cellphones. It also has a better transmitter with double the power of your
cellphone. This allows your voice to be heard by distant cell sites, increasing
coverage up to 50 miles or more.
greatly improves signal strength inside a building when using your cellular
phone. It does this without a physical connection to your phone, allowing you
to walk freely during a call. Because it is wireless multiple cell phones can
be used simultaneously.
The signal is received by the
outside antenna from the cell site. It is then amplified and repeated to your
phone through the inside antenna. When the phone transmits it is received by
the inside antenna. It is then amplified/repeated to the cell site through the
Mount the Amplifier/Repeater on a
wall or ceiling.
Connect the Outside Antenna to the
Amplifier/Repeater side labeled Outside Antenna.
the Inside Antenna
Connect the Inside Antenna to the side
labeled Inside Antenna on the Amplifier/Repeater.
The Inside Antenna
should be centered in the weak signal area. The Inside Antenna should be at least
7 feet from the ground.
Parts Required (Not
- Outdoor antenna: Magnet Mount
(301103), Roof Mount "Trucker" (301101) or Yagi (301111)
antenna: Magnet Mount (301103), Mini Magnet (301113) or Stealth (301106)
Coax Cable may be needed for some installations
- N-Male to FME-Male
Adapter (may be needed when using 9913 Coax Cable)
|Part Number ||801105 ||801165 ||801108 ||801110 ||801365 ||804005 ||804006 ||801506 ||801606
|Channel || || ||A ||B
|Gain (Rx/Tx) ||50 dB ||65 dB ||60 dB ||60 dB ||60 dB ||50 dB ||60 dB ||60
|1850-1990 MHz ||806-824
|1710-1755 MHz |
dB nominal ||4 dB
dB nominal ||3
dB typical |
|Flatness ||+/-2.5 dB ||+/-4 dB ||+/-2.5 dB ||+/-4 dB |
|Isolation ||>90 dB ||>90 dB |
||6 V DC, 3 A
VAC, 3 A max ||6
V DC, 3 A |
|Connectors ||N-Female 50 ohms ||N-Female 50 ohms |
|Dimensions ||5.6 x 3.6 x 1.7 (inches) ||5.6 x 3.6 x 1.7 (inches)
|Weight ||1.5 lbs ||1.5 lbs |
You May Also Consider
Product Reviews for Wilson Electronics 804006 Wireless In-Building Cell Phone Repeater for Nextel and iDEN (60 dB) (804006)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!