Availability: Usually Ships Same Day Condition:New
Your Price: $28299
List Price: $328.99
This DIRECTV and DISH Network satellite tracking meter from Solid Signal has everything for the professional and hobbyist. It comes pre-loaded with satellite settings for all the common providers. It also provides 21V of power to your dish, which allows you to power your SWM-enabled dish without using a power inserter or splitter. This meter is perfect for use with DIRECTV, DISH and FTA systems. Align your satellite dish easily and accurately with Solid Signal’s signal meter.
Quickly locates and identifies your desired satellite signal, which allows you to position your dish
Reads signals from the DIRECTV SWM LNB-equipped dishes
Pre-loaded codes easily identify DISH Network, DIRECTV, and FTA satellites
Now Identifies DISH Network as well as DirecTV satellites
Please visit www.emitor.se for upgrade / firmware and owner's manual
Get aligned quickly and easily with the
SATLOOK-LITE meter from Solid Signal. Professionals and hobbyists will
appreciate the EASYFIND function that allows you to select a satellite from a
pre-loaded list. The meter stores the most recently used satellite for quick
acquisition next time you aim as well.
love the high degree of accuracy and precise information. Hobbyists will love
the simple setup, free from unnecessary or confusing buttons. If you’ve used a
meter before, you can probably use the SATLOOK-LITE within minutes of opening
it up for the first time!
The backlit LCD is super-bright
and showsthe different modes like; satellite id and signal spectrum, as well asBER
(bit error rate) and S/N (signal/noise ratio). It uses the satellites own
broadcast network information table for easy and quick identification.
uses both a visual spectrum and audio tone to help the novice properly align a
dish with ease.
The rechargeable battery can go to full
charge in about an hour, and the unit can be operated on AC while the battery
SATLOOK-LITE Features: •
Input frequency: 920-2150MHz. • Sat-TV min level in: About 35 dBuV
(noise). • Sat-TV max level in About 100 dBuV. • Input impedance: 75 Ohm, F-connector
• Measuring method: EasyFind
satellite-search, BER (bit error rate), S/N (signal/noise-ratio) and Spectrum
analyzer • Max-level:
Thermometer scale showing max. •
Maxhold function. • BER and
S/N showing max values. • Pitch-tone,
highest tone on loudspeaker.
FEC, Symbol-rate Frecuency, • Reading
out the NIT in the bitstream • Satellite locks on • 13/18v,
Presentation: • On LCD
with backlite. • Power out::
13-18V. • 22 kHz tone: on/off.
• DiSEqC: 1.0 and 1.1. • Battery: Built in, rechargable
LiP-type. • Operational: About
1 hour fully charged. • Weight:
Less then 1kg incl.battery. • Accessories:
Power-supply of 230V12V,1.2A •
Includes car-charger. • 1 Year Warranty on Meter • 6 Month
Warranty on Batteries • RF input range: 920 ~2150 MHz • Input Level: 35~100dBuV • Presentation: LCD 128X64 pixels Backlit
screen. • RF signal in
thermometer scale • LNB Voltage
& Type, Carrier frequency • Measuring Methods: SNR (Signal/noise ratio) •
Quality derived from BER (Bit Error
Rate) • Audible pitch-tone with
internal speaker • Power
Supply: Internal NiMH rechargeable battery, 9.6V, 2500mAh • Overload Protection: Automatic electronic fuse
reset when a button is pressed • LNB Power: 13V, 18V or 21V selectable •
AC Charger Included, 100-240 VAC, 12V,
1.25A • Car Charger Included, 2.1mm jack, Positive center, Negative
outside • Firmware Updates
RS232 with DB9 connector • Warranty period is one year with limitations
outlined in the owners manual.
Here are available downloads related to this product:
Product Reviews for Solid Signal DIRECTV and DISH Satellite Signal Meter (SATLOOKLITE)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (1 reviews):
Recent Review: kennylive - Darien, IL - 2/3/2016 Infinitely better than the little aiming boxes
Infinitely better than the little aiming boxes kennylive - Darien, IL - 2/3/2016 11:22:55 AM The menu and options can be intimidating, but once you sort through them this meter is fantastic. The 'Satellite Scan' function is very useful to tell you which satellite you're actually pointed at. It has a much more robust battery than the AA based setup in the Digiair Pro ATSC but 30 minutes is very optimistic. Don't leave it on unless you're actively aiming, and of course a replacement battery will have to come from the maker.
Televes H30 CATV Meter/Analyzer with Remote Control (593101)
The H30 Series is a lightweight hand-held unit, packed with
all the features needed to install and troubleshoot CATVnetworks and television system using QAM digital modulation as well as NTSC analog signals.. This handy little meter is inexpensive enough ...
Hides a distinctive marker signal in the system video carrier
used for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas. Specify tag frequency from 10 to 23 Hz (20 Hz Standard). One ...
9 GHz Microwave FieldFox Vector Network Analyzer.. Specs. FieldFox brings
bench-level accuracy into the field by delivering precise handheld microwave measurements that agree with benchtop analyzers. FieldFox VNAs provide full two-port S-parameter measurements with the most accurate calibration technique ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).