Model SDPI6Sx powers a DIRECTV SL5 LNB, polarity locks the four dish outputs and provides two 20 V outputs to power the 95º LNB on the DTV66E dish and a possible future polarity. Line powered amplifiers may be powered by the power inserter. A total of two amps of DC is available from the short circuit protected power transformer.
DC Power upconversion to allow powering from multiple DSWM30 multiswitches.
Simplifies MDU installations by providing an integrated module for locking LNB polarizations and satellite selection
Provides multi-color LED indicators to show LNB voltage regulator levels
Supports Slimline Ku and Ka-band ODU installations
Unit Requires 20V Power Supply
Required 20V Power Supply; DA-18 < clicking this model number will link you to the product on our webpage.
Here are available downloads related to this product:
Model 4SATPL-T generates powering and control signals necessary to remove
the dish powering burden from DBS receivers or multi-switches. Receivers need only power model WB68 switches rather than the SlimLine dish. Control signals from multipleswitches are blocked by the ...
DBS devices require DC voltage on the coax output connector
and RF signals must pass from input to output on the power inserter. Sonora power inserters couple regulated DC voltage on coax cables while allowing the DBS signal to ...
Solid Signal 2-Way Satellite Off-Air Splitter with 29v
This kit contains a 2-Way splitter for satellite and off-air
signals. First rate and economical, it will sync with most applications requiring 5-2300MHz signal. It also includes a regulated 29v 1.4A Power Supply.
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).