Model SD SWMD3 is intended for CATV and SWM
isolation where both 2.3 MHz and MRV fi ltering is critical.
The D3 adds a band reject fi lter at 475 to 625 MHz.
The SD SWMD3 is suggested for applications where MRV
fi ltering occurs in a single diplexer.
Here are available downloads related to this product:
Microlab Model BK-04N series is a Diplexer which allows combination
and separation of signals, to minimize band inter-reaction, the inputs are well isolated and have minimal insertion loss over their respective frequency bands. Attention to mechanical design ensures low ...
Eagle Aspen Single Port Power Passive Diplexer (500249)
This Eagle Aspen single-port power-passive diplexer is used for combing
and separating antenna TV, cable signals, and satellite signals on a single coax cable run. This single-port passive diplexer works for the vast majority of situations at both the ...
Sonora High Performance 24dB Tap Directional Coupler 1-Port
DBS Ka/Ku or ATSC off-air signals are required at multiple
locations connected via coax cable. Signal must be directional coupled from the trunk to conserve trunk signal level while providing sufficient tap levels. Sonora HRT Models placed in the ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).