Use this Non-Penetrating Roof Mount Base to safety and securely install satellite and TV antennas on flat roofs where drilling holes isn’t an option. The heavy-duty steel base consists of (6) pieces of equal length which can be assembled from 35.5” x 35.5” up to 36” x 36” for a wide-set, sturdy base – the perfect size for the concrete blocks needed for ballast (not included). Additionally, the (4) struts of the unit are 22.5” in length. Once placed and weighed down, simply add a mast (sold separately links below) and attach your antenna/dish of choice.
Made of weather-resistant steel for long life in areas where you don't want to drill into a surface
Great for temporary installations
Mount a satellite dish or antenna without drilling holes into roof
Includes all necessary hardware
Supports masts up to 2” in diameter
The braces are 22.5 inches long (from bend) - The hole to secure the brace to the mast is 22" on center
Uses standard grade # 2 bolts
Requires concrete block ballast to properly weigh it down
Manufacturers may vary
Mast is NOT included - but can be found here:
1-1/4" O.D. Mast suitable for TV antenna, radio, and wireless internet SKY32817A
1-5/8" Mast suitable for older DIRECTV and DISH satellite dishes SKY32817B
2" Mast suitable for Super DISH and newer DIRECTV satellite dishes SKY32817C
Here are available downloads related to this product:
Product Reviews for Solid Signal Non-Penetrating Roof Mount for Antennas and Dishes (SKY32816)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (1 reviews):
Recent Review: Mike W. - O'Fallon, MO - 9/15/2014 It Took Some Doing To Put it Together I Did Not Find Any Instructions On How To Put It Together. I Had To Look It Up To See The Diagram of The Photo
It Took Some Doing To Put it Together I Did Not Find Any Instructions On How To Put It Together. I Had To Look It Up To See The Diagram of The Photo Mike W. - O';Fallon, MO - 9/15/2014 9:37:58 AM Once I Got It Put Together It Is Sturdy As A Rock.
weBoost NMO Antenna Mount 3/8-inch SMA-Male Connector (905814)
Call us for our best price! 877-312-4547 This 3/8" NMO
mount from weBoost replaces the older 3/8" NMO Mount with 14-ft RG58 Cable with FME-Female Connector. The product requires a hole to be drilled through a metal surface with ...
Winegard Non-Penetrating Roof Mount for Satellite Dishes
This base frame supports 46-60cm satellite antennas for areas where
drilling into the roof is not ideal. This type of non-penetrating roof mount is made for mounting a complete satellite dish and J-mount to the base. This single base ...
VMP 2-Inch OD Non-Penetrating Roof Mount with 30-Inch
The FRM-Series is a non-penetrating roof mount for satellite, off-air
TV antenna, radio, WiFi and cellular antennas. Using standard 8” x 8” x 16” cinderblocks as ballast, the FRM-Series provides a durable and reliable mounting platform to mount your ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).