Availability: Usually Ships Same Day Condition:New
Your Price: $9999
List Price: $149.99
Description
The SWM8 will upgrade your satellite system in two big ways. The first is expanded a standard dishes output from 4 to eight. The second is the ability to run just one line into a building and split it up to eight times and feeding up to eight receivers.
Key features
Feeding the original four lines from a dish into the SWM8 now gives you one line that can be split and distributed almost like cable TV
For those with the standard four output dish this multiswitch will enable to use the newer line of DIRECTV receivers like the H25, HR44, HR54 and more
Also used to combine international dish (95º sat and 72.5º sat) with the SL3 or SL5 satellite dish
Contains a built-in diplexer for combining off-air signals with DIRECTV satellite signals onto a single line
SWM-compatible splitter (not Included) are needed for multiple receiver installations Click Here
This product requires the SWM PI-29Z power inserter (NOT INCLUDED) found here
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99°/101°, 103°/110°/119° satellites, plus two Flex Ports (95º sat and 72.5º sat)
Contains a built-in di-plexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling
For a compatible splitter(Not Included) which is needed for multiple receiver installations Click Here
This product requires the SWM PI-29 29v Power Inserter (NOT INCLUDED) found here
Provides eight independent channels for supporting up to 8 DIRECTV satellite tuners
Click the specifications tab to watch a video about the SWM-8 Multi-Switch
Compatiable with the D12, R16, R22 all H and HR series receivers
Die-cast housing is suitable for both indoor and outdoor use
Provides AGC for the satellite input signal
Specs
The new SWM-8 allows installers to run an AT9 or AU9 DirecTV satellite antenna plus 2 Flex ports (72.5 & 95) down a single RG6 Coaxial cable! At the end of the single wire a SWS-2, SWS-4, or SWS-8 splitter is required (not included) to distribute the signal to as many as 4 DVRs or 8 HD receivers! Please Note the SWS series of splitters are specially designed for the SWM-8; you must have an SWS-2, SWS-4, or SWS-8.
The SWM Port Single Wire Solution is ONLY compatible with the H20, HR20 (Firmware .2042), H21, and HR21.
The three "Legacy" ports are compatible with all older Receivers, however, each single tuner receiver using the "Legacy" port requires a cable running directly to the SWM-8 unit. DVRs using the "Legacy" ports require 2 cables coming back to the SWM-8 unit. Features:
Provides eight (8) independent channels for supporting up to 8 DIRECTV satellite tuners
Provides two outputs to serve two customer dwellings (typical)
Contains a built-in diplexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling
Provides AGC for the satellite input signal.
Die-cast housing is suitable for both indoor and outdoor use.
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99/101, 103/110/119 satellites, plus two Flex Ports (95 sat and 72.5 sat)
Uses only 1 RG6 between SWM-8 and STS Splitter (not included)
Maximum Distance from SWM8 to Splitter: 200
SWM Port Compatible With:
HR21 HD DVR Receivers
H21 HD Receiver
HR20 w/ .2042 Firmware Update
H20 w/ .2042 Firmware Update
Specifications:
Satellite Input Frequency Range: 250 - 2150Mhz
Terrestrial & SMATV Input Frequency Range: 54 - 806Mhz
Return Path Input Frequency Range: 5 - 40 (CMTS return path must use 33-40 MHz band)
Number of Input Ports: 6 Satellite & 1 Terrestrial /SMATV
Product Reviews for DIRECTV SWM 8 Channel Single Wire Multiswitch (SWM-8-NOPOWER)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (1 reviews):
Five Stars:
0 (0%)
Four Stars:
1 (100%)
Three Stars:
0 (0%)
Two Stars:
0 (0%)
One Star:
0 (0%)
Recent Review: chassit - Mississippi, Mississippi - 3/28/2013 Works Well and Installs Easily
Customer Reviews:
Filter:
Works Well and Installs Easily chassit - Mississippi, Mississippi - 3/28/2013 This unit works exactly as advertised and was easily installed between my existing AU9 dish and 2 HD receivers.
CableTronix Rack Mount Satellite Multiswitch 2-In/16-Out
Description:
The CTMS-16RKPS is a professional grade rack mountable satellite multiswitch
providing RHCP and LHCP switching for up to 16 satellite receivers. Designed for commercial grade satellite headends, the CTMS-16RKPS inputs are selected by 17V to 18V from the satellite ...
DIRECTV Six SWM Distribution Module Chassis (FMC-6M)
Description:
Can be cascaded for easy expansion to more than 32
tuners. Minimal through signal loss. Fully configured, the FMC-6 requires three 24V VCD power supplies. Easy installation. LED indicators confirm presence of signals and DC line power.
Description:
DBS hubs distribute (2) DishPro 950 to 2150 MHz signals
to switches. DBS signals are amplifies with automatic gain amplifiers and split to a constant level to achieve maximum drop distances.
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).