Solid Signal > Commercial Equipment > Video Distribution > Hall Research UHBX-R-PD

Hall Research HDBaseT Extender Receiver HDMI RS232 IR PoH (UHBX-R-PD)
Hall Research HDBaseT Extender Receiver HDMI RS232 IR PoH (UHBX-R-PD)

Click Images to Enlarge

Hall Research HDBaseT Extender Receiver HDMI RS232 IR PoH (UHBX-R-PD)

Brand: Hall Research           P\N: UHBX-R-PD           UPC: 722301541920

No Reviews Available  Be the first to write one!

Availability: Usually Ships Same Day
Condition: New

Your Price: $34675

List Price: $365.00


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Hall Research This receiver module when paired with a compatible sender (UHBX-S-PSE), can extend HDMI, bi-directional IR, full-duplex RS232, and PoH (power over HDBaseT™) over distances of up to 150 meters (500 feet) using a single Cat6 cable. The pair can extend HDMI or single-link DVI video of virtually any resolution, to a maximum distance of 500 ft (150 m). These extenders comply with Power-over-HDBaseT™ or PoH, hence only one end requires a power supply. The end identified as power sourcing equipment injects power on to the Cat6 cable and the side identified as the powered device is powered through the Cat6 cable. The power sourcing equipment side requires connection of an AC adapter that supplies 5v DC, while the PD or wall plate side is simply powered through the RJ45 connector from the opposite side.

The full-duplex RS-232 Serial Port extension is provided that can operate at any baud rate to 115,200 (independent of video activity). The extender can also extend IR from one end to the other. IR Detector and IR Emitter cables are sold separately. The IR extension preserves the modulation (carrier) frequency and provides compatibility to virtually any standard. It supports modulation range from 30 KHz to 60 KH. Two user selectable distance modes are available: Standard (default) and Long Reach. If the length of UTP cable is less than 100 meters (330 feet), then STD mode should be used. For the lengths above 330 feet, Long Reach (L.R.) mode must be set. Long Reach setting can extend a maximum of 1080p@60 Hz, 8-bit color (does not support deep-color or 4Kx2K), RS232, IR, and Power up to 500ft (150m)

Key Features
  • Extends HDMI or DVI video to 500 ft on just one Cat6
  • Includes RS232 and IR extension in both directions
  • Supports virtually all HDMI and DVI resolutions including 4Kx2K
  • Only one end requires power, the other side is powered via UTP
  • Power-over-HDBaseT™ meets IEEE 802.3af standard
  • Sturdy metal enclosures with mounting provisions


  • Complies fully with HDBaseTT standard

  • Runs from just one +5vDC supply

  • RS232 Supports all baud rates regardless of presence of video

  • IR extension is carrier frequency agnostic and supports 30 KHz to 60 KHz modulation to provide compatibility across all IR standards

  • Fully isolates ground between TX and RX sides

  • Compact, Rugged, Reliable, and Economical



Product Reviews for Hall Research HDBaseT Extender Receiver HDMI RS232 IR PoH (UHBX-R-PD)

Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!

Related Products
Outputs 2 HD signals in QAM or DVB-T/C over RF ...
Kramer’s SC/SC/OM3 series is an OM3 fiber optic multi-mode 50/125um ...
This unit consists of HTX-8800-U HDMI Switcher and 1xHTX-Rx Receiver. ...

Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2020 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail