Solid Signal > Commercial Equipment > Modulators and Demodulators > Blonder Tongue CAMS-60S
Blonder Tongue Channelized Agile Integrated Stereo Audio/Video Modulator (CAMS-60)
Brand: Blonder Tongue
No Reviews Available
Be the first to write one!
Stereo audio/video modulator series are professional quality, channelized, heterodyne audio/video modulators. These units provide audio and video modulated RF carrier output on any SUB, VHF, UHF, or CATV channel (7 to 450MHz and 50 to 860MHz). Any standard audio/video source can be used, such as satellite receivers, television cameras, video tape recorders, or television demodulators. These modulators feature a frequency agile output converter followed by a single channel removable output filter providing +60dBmV output. This design configuration permits easy channel changes in the filed by simply replacing the output filter module and setting the output converts dip switches to the new channel.
Rock solid, no-drift output for the life of the modulator. A custom SAW filter is employed to provide true vestigial sideband selectivity with built-in FCC group delay pre-distortion. A rear panel switch allows selection of either baseband audio or 4.5 MHz audio.
EAS/ALT IF ready via manual or automatic mode
Front panel accessible level controls for easy set-up and adjustments
Rack mountable - 1 EIA (1.75-inch) rack space
Exceptional broadband noise performance of -110dBc
-60dBc spurious response for the entire level range
- EAS/ALT IF Ready Via Manual or Automatic Mode
- Front Panel Accessible Level Controls for Easy Set-Up and Adjustments
- Rack Mountable - 1 EIA (1.75") Rack Space
- Exceptional Broadband Noise Performance of -110 dBc
- -60 dBc Spurious Response for the Entire Level Range
- Works in Conjunction with High Performance Channelized Output Filter Modules (OFM)
The CAM-60 Series takes baseband audio and video and modulates these signals onto the desired output channel (each modulator has separate audio and video inputs). The heterodyne conversion process used in the CAM-60 Series employs a crystal referenced, PLL synthesized local oscillator, with a 12.5 kHz tuning increment. This guarantees rock solid, no-drift output for the life of the modulator. A custom SAW filter is employed to provide true vestigial sideband selectivity with built-in FCC group delay pre-distortion.
The CAM-60 Series meets FCC Docket 21006 aeronautical frequency offset requirements (±5 kHz video carrier accuracy) and accepts standard polarity (sync negative) video in the range of 0.7 to 2.8 V p-p. A 4.5 MHz audio input is provided, which preserves the stereo audio available from most satellite receivers and demodulators. A rear panel switch allows selection of either baseband audio or 4.5 MHz audio.
You May Also Consider
Product Reviews for Blonder Tongue Channelized Agile Integrated Stereo Audio/Video Modulator (CAMS-60)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!