Availability: Usually Ships Same Day Condition:New
Your Price: $13022
List Price: $204.99
Microlab Model Dx-16 series of 2, 3 and 4 way Power Splitters has been designed to evenly split high power cellular and WiMAX signals with minimal reflections or loss. All joints are moisture sealed to meet the IP67. The mechanical shape allows easy attachment to wall using the supplied clips. The wide frequency range allows use with multiband antennas and leaky cable systems. With few solder joints and an air dielectric, the loss has been minimized and reliability enhanced. Outdoor rated with 7/16 DIN connectors. Units are available with either N Type connectors. Low PIM <-153 dBc (2 x +43 dBm tones).
MICROLAB/FXR 698-3800 MHz 4-way power splitter
PIM Minimum: -153 dBc
RF Connectors: 7/16 DIN Female
Mfg. Warranty: 1 Year
6dB split loss through the splitter
7/16 DIN Female connectors.
Frequency Range: 698-3800 MHz
Maximum Power: 500 W
PIM Typical: -153 dBc
Loss: 6 dB
Maximum VSWR: 1.30:1
Here are available downloads related to this product:
Kathrein 3-Way RF power divider has been designed to evenly
split high power cellular signals with minimal reflections and loss. Unequal Power Splitters maintain DC continuity to both the main and coupled ports. Use where efficient broadband power splitting ...
DBS devices require DC voltage on the coax output connector
and RF signals must pass from input to output on the power inserter. Sonora power inserters couple regulated DC voltage on coax cables while allowing the DBS signal to ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).