Ideal for low-profile installs, this ELAN IR Kit features (1) ELAN IRS3 Flush Mount IR Sensor w/3.5mm Quad Plug that was designed to mount flush in a cabinet or wall. It has a small footprint and low-profile bezel that make it an ideal choice wherever an inconspicuous IR Sensor is needed. The 3.5 mm Quad “mini” plug on the IRS3 makes for a quick connection to an IR distribution block.
- 1 ELAN1008 IRS3 Flush Mount IR Sensor w/3.5mm Quad Plug
- 4 ELAN1000 IRE2 IR Emitters w/Talk Back
- 1 XAN1202 781ERGPS Regulated Power Supply
- 1 XAN1204 789-44 One-Zone Four-Source Connecting Block
The IR Solution
It’s easy to say that when it comes to home décor, your customers’ tastes lie in simplicity and minimalism. “Streamlined” is the headlining theme – this includes clean, sharp edges in modern furnishings, as well as a set of neatly hidden A/V components that don’t clutter a wall-mounted HDTV.
Although this setup is aesthetically pleasing, therein lays the problem of not being able to use the remotes infrared (IR) signal to command the system that’s tucked away inside a closet or credenza. The solution, of course, is an IR control system. A single, compact IR receiver unit mounted outside the cabinet communicates with all of the hidden components, maintaining the systems IR operation while keeping things clutter-free.
So, keeping your customers in mind, we put together a series of ELAN® IR Kits that offer complete control of any home theater or audio system. These cost effective kits ensure that your installs leave that “Streamlined” look that your customers want.
ELAN® Flush Mount IR Kit w/Plug
Ideal for low-profile installs, this ELAN® IR Kit features (1) ELAN IRS3 Flush Mount IR Sensor w/3.5mm Quad Plug that was designed to mount flush in a cabinet or wall. It has a small footprint and low-profile bezel that make it an ideal choice wherever an inconspicuous IR Sensor is needed. The 3.5 mm Quad “mini” plug on the IRS3 makes for a quick connection to an IR distribution block.
Speaking of which, the kit also comes with (1) Xantech® 789-44 One-Zone Four-Source Connecting Block that acts as the central control for the IR control system. The precision steel-encased block has two jobs: Routing IR commands from the receiver to the rest of the A/V system through the emitters, and distributing the power required to "drive" the receiver/emitter system.
Power it Up
To power the block, the kit includes (1) Xantech 781ERGPS Regulated Power Supply. This highly efficient power supply has a locking indentation ring that provides a secure connection to the connecting block. Over three times more efficient than a compact fluorescent light bulb, the digital power supply has on-board over-voltage protection for thorough system operational stability and security.
Control Each Component
To complete the kit, (4) ELAN IRE2 IR Emitters w/Talk Back are provided. These bad boys connect directly to the distribution block and emit the IR signal to the appropriate device. They come with a unique docking module that stays in place on the IR window while allowing for easy removal of the emitter when rearranging or servicing A/V components. The docking module’s larger surface area also provides better adhesion to component IR windows. The IRE2s have leads that measure 8 feet and a standard 3.5mm mono “mini” plug.
1 ELAN1008 IRS3 Flush Mount IR Sensor w/3.5mm Quad Plug
4 ELAN1000 IRE2 IR Emitters w/Talk Back
1 XAN1202 781ERGPS Regulated Power Supply
1 XAN1204 789-44 One-Zone Four-Source Connecting Block
ELAN IRS3 Flush Mount IR Sensor w/3.5mm Quad Plug:
Single IR sensor
Designed for flush-mount installation
3.5mm mini plug connector
ELAN IRE2 IR Emitter:
Single-head IR emitter
XANTECH 789-44 One-Zone Four-Source Connecting Block:
Connects four emitter ports and power supply to all Xantech infrared receivers and keypads
Four parallel emitter ports with 470-Ohm resistors drive four single or four dual emitters
Quick-connect stereo mini jack for IR Receivers that use a stereo mini plug
STATUS terminal for connection of IR Receivers and Keypads that have status LEDs
2.1 mm coaxial power jack
Dimensions 3" x 1 3/4" x 13/16" (77mm x 45mm x 21mm)
XANTECH 781ERGPS Regulated Power Supply:
Input Power 100-240VAC, 0.3A
Output Power +12VDC, 500mA
6 foot cable, 2.1 mm coaxial secure-fit plug