Seal ring pre-installed over nut. Reusable. Improved visibility during installation. Improved torque when finger tightening connector for indoor use. Uses all standard tooling. The new UltraRange® SR series is the next advancement in weather resistant compression “F” connectors. The SR series connectors are shipped with a seal ring pre-installed over the connector nut. The seal ring is conveniently out of the way and doesn’t interfere with normal installation practices. This unique design allows visual inspection of the cable core and verification of the center conductor length to ensure proper installation.
- Bag of 100
- Seal ring pre-installed over nut
When installing the connector to an “F” female port, the seal acts as a grip aid and doubles the tightening torque when finger tightening. After finger tightening the connector, the seal is slid forward over the female port, and the nut is fully tightened with a 7/16 wrench. If removing the connector, this sliding seal design (patent pending) allows the connector to be removed without damage to the seal or connector. Both are reusable when removed from the “F” female port.
The UltraRange 59 & 6 SR Series connector designs incorporate a free spinning nut, making installation faster and more reliable. The one-piece design eliminates loose parts and allows rapid, consistent connectorization without the risk of misaligned parts. The UltraRange compression technology provides 360 degrees of contact to the cable, providing excellent RF shielding integrity and a complete seal to the cable jacket to lock out moisture.