Add on or replacement encoder card for Thor CM2 QAM-IP Chassis Multiplexer system. The CM2 chassis has two encoder bays that can accept any two CM2 depth encoder cards by Thor. This card adds one Standard Definition channel from a CVBS Composite input to the list of availible programs in the QAM-IP managment interface. This card can be added to a QAM-IP unit with an open chassis, or can replace an existing card. QAM-IP systems allow encoding and distribution of multiple channels from different video formats through different cards. Once installed in the CM2 QAM-IP chassis, all encoding parameters are available through the standard web interface. Each channel is independently configured, and can be encoded in either MPEG-2 or H.264. All PID and Electronic Program Guide feilds can be set, and the video and audio bit rates can be adjusted. This card is not compatible with CM4 QAM-IP chassis, such as the H-4HDMI-QAM-IP. These chassis have dual encoder depth bays.
Add 1 additonal SD channels to any Thor CM2 QAM-IP Chassis
High Level hardware encoding in both MPEG-2 or H.264
Can be combined with other CM2 card types for all video formats
Encoded Program output from QAM-IP chassis as RF, IP, and ASI
All PID and Electronic Programing Guide fields are configurable
Input: 1x CVBS - Analog Composite Video / Stereo Analog Audio
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).