Availability: Usually Ships Same Day Condition:New
Your Price: $4299
List Price: $69.99
The HDA200 24dB Distribution Amplifier from Winegard is a antenna booster designed to optimize the signal to your HDTV. Versatile, effective and seamless to maneuver, the specs speak for themselves: 24dB gain, 5-42MHz 2-way bipass at +12db, 0-18dB gain control, and 20dB switchable FM trap. A great choice for amplification when placed close to the antenna or cable drop.
If using an indoor antenna, dont expect a big boost in signal unless your cable lengths is over 20 ft and/or you are splitting the signal
Amp works best when located as close to the source (Antenna, or Cable TV Drop)
Can be located anywhere in the system its convenient
Housing Dimensions: 4.90"W x 3.92"H x 1.5"D
Power Supply Voltage: 12VDC-200 mA
Power Supply and Inserter Included
Bandpass Forward: 54-1000 MHz
Weather resistant enclosure
Noise Figure: 4.5 dB
Gain: 24 dB
The HDA-200 has a single RF input, 24 dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at +12 dB gain. The HDA-200 has 0-18 dB gain control and 20 dB “switchable” FM trap, and a return path.
Winegard’s new HDA series of Distribution Amplifiers was designed to meet the market demand for a heavy duty, quality built, cost effective solution for the amplification and distribution of analog/digital broadcast signals from Off-Air and cable TV stations. Both the HDA-100 & HDA-200 are housed in an industrial grade, weather resistant enclosure. Each unit has an RF input, amplified RF output, and DC power insertion jack. Each amplifier also provides a 5-42 MHz 2-way bi-pass.
The HDA-200 has a single RF input, 24 dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at +12 dB gain. The HDA-200 has 0-18 dB gain control and 20 dB “switchable” FM trap to eliminate those offending FM radio stations. These features, when combined with the 12 dB of amplified gain for the 2 way 5-42 MHz return path make the HDA- 200 a superior solution for the “Techno” savvy consumer.
Bandpass Forward: 54-1000 MHz
Bandpass Reverse: 5-42 MHz
Max Output per Channel (80 ch CATV): +25 dBmV (Note 1)*
Max Output per Channel (16 ch off-air): +40 dBmV (Note 2)**
Max Input per Channel (80 ch CATV): +8 dBmV (Note 1)*
Max Input per Channel (16 ch off-air): +23 dBmV (Note 2)**
Max Input Reverse Amp: +23 dBmV (at 1dB comp)
Gain: 24 dB
Gain Control: 0-18 dB
Reverse Gain: +12 dB
Noise Figure: 4.5 dB (at max gain)
FM Trap: -20 dB (95-108 MHz)
Operating Temp: -30° to 140° F
Power Supply Voltage: 12VDC - 200 mA
Housing Dimensions: 4.90” W x 3.92” H x 1.5” D
Here are available downloads related to this product:
Product Reviews for Winegard 24dB Distribution Amplifier (HDA-200)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (4 reviews):
Recent Review: Do It Yourselfer - Longmont, CO - 2/20/2015 Awsome!
Awsome! Do It Yourselfer - Longmont, CO - 2/20/2015 3:02:23 PM I installed a Solid Signal Xtreme Signal HDB91X antenna about 2 weeks ago. When I finally got it adjusted to get all the major stations out of Denver, I was getting 60 to 73 signal rating on most stations. I added the Winegard HDA200 Distribution Amplifier yesterday. WOW! What a difference! The snow on the screen is gone and the wavy lines diminished to almost non-existent. And once I adjusted the antenna and found the directional Sweet Spot, now I'm getting a constant low 80's to high 90's signal readings. VERY Satisfied!
No problems so far EastTexas - Grapeland, TX - 2/19/2014 7:54:23 AM Using the HDA200 paired with a HDB91x @ 25 feet above the ground on a 75-foot run of RG-11. Pulling in stations at 60-70 miles away with 80-90% signal strength according to the meter on the TV. Good products and as always, excellent service and prompt shipping from Solid Signal.
good product roadsterpu - hartland, andmich - 3/28/2013 I like the design. some brands are up in the sky with the antenna which in my case is 40 feet in the air.
Works very well.Noticable Improvement. Mr Jack - Tinley Park, ley Park IL - 3/28/2013 The FM Trap switch In/Out was not described in instructions.
Blonder Tongue Fiber Optic Receiver/1GHz Distribution Amplifier
The FRRA is a fiber optic receiver module integrated with
a rack mounted broadband distribution amplifier (RMDA). This model has a 1GHz RF bandwidth and features a FC/APC optical input connector.. Features. LED For Optical Input Status. Gain and ...
Thor H-ASI-AMP 1x16 DVB-ASI Distribution Amplifier with PID
High quality rack mount 16 output DVB-ASI distribution amplifier for
broadcast. This is a high output platform designed for large scale distribution of ASI programming in broadcast environments. Based on application specific relocking circuitry designed for multi rate ASI ...
Pico Digital Broadband Bi-directional Push-Pull Distribution
The Pico PIDA-1000 amplifier is a two-way broadband distribution amplifier
incorporating dual push-pull circuitry for extremely low distortion and high output levels. A selection of removable attenuator pads and equalizers are also available for the PIDA series.. Features. 54~1000MHz ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).