Availability: Usually Ships Same Day Condition:New
Your Price: $3999
List Price: $69.99
Boost your signal strength with this TV antenna preamplifier from Winegard. Benefit from a stronger antenna signal for better reception. Your HDTV reception issues are now over. Look no further than Solid Signal for antenna TV reception tips! The best signal booster can now be yours.
Boost XT is the most advanced digital TV antenna amplifier available! It works with any non-amplified outdoor antenna and features the lowest noise figure (1 dB typical). Boost XT makes up for signal loss from long cable runs and splitters. Get better signal strength and more reliable reception. Give your antenna a boost!
Includes: Preamplifier, USB power cable, 110V adapter, power inserter, hose clamps, & weather boots
Powered through coax connection - no additional electrical wiring required
1-year limited warranty
Made in the USA
20 dB gain delivers all the power you need for long cable runs (Up to 300 ft.)
Includes: Preamplifier, USB power cable, 110V adapter, power inserter, hose clamps, weather boots
Powered through coax connection - no additional electrical wiring required
Energy saving USB power supply with LED power indicator
Innovative engineering from Winegard, the antenna experts
Boost is the most advanced digital TV antenna amplifier available featuring the lowest noise figure (1 dB typical).
Using the latest advances in amplifier technology, Boost, enhances any antenna, delivering more range and available channels. Give your antenna a Boost today!
Need more range? Looking to get more channels? Are some of your channels pixelating or dropping out? With the new Boost amplifier series by Winegard you can maximize your current non-amplified antenna performance without having to upgrade to a newer antenna. Designed and engineered by the antennaexperts at Winegard, these cutting edge amplifiers are loaded with the latest technology to set a new standard for digital TV amplifiers.
Most advanced digital indoor antenna amplifier design Boost is the most advanced digital dual-band TV antenna booster available today. This indoor amplifier increases range and delivers a crystal clear TV signal to HDTVs so viewers can get more broadcast TV channels in high definition than with an antenna alone. Thanks to Clear Circuit Technology, Boost also features the lowest noise figure (1 dB typical). The Boost enhances any non-amplified indoor antenna, delivering more range and reducing dropout and pixelation.
Ultra Low Noise Preamplifier Delivers! Ultimate Digital TV Picture and Sound Quality Boost XT outdoor preamplifier works with any passive outdoor TV antenna and extends the signal range. What sets the Boost XT apart from other preamplifiers is that it boasts a true dual-path design with separate filtering and amplification paths for both frequencies. This revolutionary TwinAmp Technology greatly enhances signal selectivity and reduces noise and interference to the lowest levels of any product in this category.
TwinAmp Technology delivers extraordinary performance and signal accuracy TwinAmp Technology separately amplifies VHF and UHF signals. This separation of bands increases signal handling capability up to 10 times more and reduces intermodulation, thereby maintaining the purest signal path possible. Bandpass filters remove RF interference including noise to the lowest levels for unsurpassed performance.
Here are available downloads related to this product:
Product Reviews for Winegard Boost XT 20dB Pre-Amp for Outdoor HDTV Antennas (LNA-200)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (10 reviews):
Recent Review: Cable cutter - Covington, LA - 8/28/2017 Perfect for most antennas
Perfect for most antennas Cable cutter - Covington, LA - 8/28/2017 6:51:25 PM Added to a Clearstream 2 antenna, 35 miles from towers, could not get abc, now get abc with no problem and no distortion from any channel, have 5 other friends and family hooked up the same way and everyone loving it.
This amplifier is an outstanding extreme low noise Design that is the backbone of excellent quality digital YV reception. Brings out the best of most Antennas. Bob Naz - Salem, NH - 5/24/2015 8:42:44 PM I used this amplifier with an Yagi Antenna RCA ANT751R s and Antenna direct 91XG and also compared with AP8275 low noise amplifier. The TV picture quality was very good because of very low noise floor and higher signal to noise ratio. 18 to 20 Db gain is more than adequate to take care of the cable attenuation( my TVs are about 125 feet of cable, about 8 Db loss) from the signal Antenna source plus an additional 6db. splitter and combiner losses. A second antenna( FL6550A) faces towards Boston TV stations. FL6550A also has similar built in LNA200 amplifier design.
The combined signals(Two fixed Antennas pointing in opposite directions, no rotor needed) feed multiple TVs getting good Signals of different channels of viewers choice at the same time). Separate Gain stage( for VHF and UHF Frequencies) and low noise frontend components Makes this amp. differentiates from many other products in the market.
A nice device indeed.
This Pre-amp is worth it!! chtyan - Raceland, KY - 5/6/2015 1:14:15 PM I hooked it up to my Hdb91x and I pickup 1 more station that I wasn't getting and it also strengthened all my other channels, but the real surprise was the next morning I thought I would try to scan in some distance channels and it did the job. I was able to get all Columbus,Oh stations that are 100 miles away tropo. Eventhough I can't get them all the time I now have them scanned in my tuner when I get a skip,which so far has been every morning since I added this pre amp. If you want to add stability to your existing channels and be able to pickup distant channels from time to time this pre amp is the way to go.Also the one LP station, I now get a signal to the south where as before I could only get it pointed directly to the transmitter NW of me.This pre amp made a huge difference for me. I'm ecstatic at the results.
Best in Class TV AAntenna preamp, Very Low input noise figure, 1db typical,improves the picture clarity, captures additional low strength TV channels, ability to use smaller Yagi Antennas that even catch fringe stations at 50 miles. Able to operate 3 TVs without breaking pictures at different rooms without additional cable amps. Improved VHF channel reception bobNaz - Salem, NH - 4/8/2015 10:08:38 AM While searching for AP-8275LNA (now obsolete), I came across Winegard Model LNA-200 preamp , split dual channel( VHF and UHF)architecture. Extreme low noise of 1db, high SNR( signal to noise ratio), was the best spec. compared the all the competitive products available. Though of lower 20db overall gain typ., compared to 29db of AP8275 and a few other models, I decided to take the risk to use Winegard LNA-200 with a smaller Yagi RCA ANT 751R antenna. Winegard Tech support suggested this device should be capable without adding extra Cable Amp.. The PICTURE CLARITY( of LNA-200 plus ANT751R) was significantly better than Larger 91XG plus AP8275 combination. Also noticed VHF channel was better as expected because of the dual architecture. Able to drive 3 TVs with 3 way splitter( about 6db additional loss) over 125 feet from the antenna. In a nutshell, improved Dual amp design , extremely low noise front end components selection of the amp. architecture with moderate gain makes the best choice for the TV preamp applications compared to any competitive amps available today. The technical and product support were outstanding. I would very strongly recommend this device to any one for similar applications. The price was right and you could easily save a few dollars in the overall Ant plus this amp cost with the use of better designed smaller compact size antennas such as RCA ANT751R without compromising channel capture performance compared to larger bulkier, expensive Antennas.
Replaced vintage PS-7000 with this unit! Ken J - Crete, IL - 3/15/2015 7:00:28 PM My old system, installed by the previous home owner, blew over in a storm. I replaced everything but the amplifier and the rotator. The PS-7000 was needed, but old. This unit was just installed, a Solid Signal Deal of the Day. Signal strength is better on all channels, but has been particularly improved on channels that are about 60 degrees off of the new antenna's direction. I will not need to replace the rotator because of this. Very satisfied! For reference, I am receiving signal from Chicago (40 miles) and South Bend, Indiana (30 miles).
Stuck between buildings and get reception now. Same as the other side of building,but more stations. Thanks Vinny - Adrian,MI, MI - 10/24/2014 4:00:59 PM The other tennants told me I couldn';t get any tv on my side of the building, because of the chruch. They were wrong.
Great product Maddy the owner - Yellville, AR - 8/25/2014 11:13:44 AM We live in a very rural, mountainous area (closest transmission tower is 120 miles). Without the help of an amplifier, such as the LNA-200 it would be impossible to receive any signal in most areas.
Added 13 channels!! duckman - sebewaing, MI - 8/25/2014 6:45:12 AM I am really happy with this product.I live 35 miles from any major city and was having a rough time getting 10 channels,I now get 23!Very satisfied!
This is a great preamp! Paul - Bloomington, IL - 10/12/2013 2:24:26 PM I thought I would give this preamp a try in place of the low noise multimedia amplifier that I have been using. Even though the signal strength hasn';t increased with this preamp, the signal quality has significantly improved. Some of the weaker stations that used to pixelate badly or drop out are now completely clear. Other stations that didn';t come in at all now come in weak. I am getting signal strengths between 90 and 100 on stations over 60 miles away with an indoor db4e antenna. This preamp will now be my first choice for any initial antenna connection. One thing to watch out for though. Be careful with the power inserter. It appears to be very fragile so don';t attempt to screw the connectors on too tight.
Added per specs from this company Kevin - Conception, TX - 9/22/2014 11:08:03 AM Installed with new antenna and booster and everything is working great. Cannot not tell how much this helped but best channels we have ever recieved
Broadband VHF, 54-216MHz. The CMA-b/SCMA-Ub Single Channel Preamplifier Series are
housed in a diecast case. Input, output, and test ports are 75 ohm, type "F" female connectors. The preamplifiers mount on a 1.5 inch O.D. (max) antenna mast with ...
PYLE PRO P2002ABTI 2,000-Watt Hybrid Receiver and Preamp
Pyle Pro's amazing new 2000 watt Hybrid Reciever and Pre-Amplifier
is the perfect solution for any home or office audio needs. Using sophisticated circuitry and premium components for uncompromising musicality -- this reciever is famous for delivering powerful and ...
Prepare for an audio treat with the Phono Turntable Pre-Amplifier.
The 12V DC, 10K? device features an output level of 2V. With a freq resp of 20Hz-20kHz, the pre-amplifier weighs 0.88lbs and includes a 110V adapter. The device has ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).