The AC/DC Industries MZL-90 heavy duty ignition-sensing delay timer with 6 ATM fuse panel starts timing when the ignition turns off to protect batteries, two-way radio equipment, computers or any other mobile equipment. The 6 ATM fuse block with screw terminals allows you to run equipment directly to the timer.
The delay timer is on when the ignition is off. An eight-position dip switch allows programming from 15 minutes to 8 hours. This shut-off timer features an emergency override switch that provides a convenient way to restore power to your equipment. The built-in diagnostic red LED display indicates timing functions are active when flashing. Input/output is 12V DC with 90 amps. Order ATM style fuses separately.
Used in public safety, surveillance, government, industrial and recreational vehicles, the AC/DC Industries ignition-sensing delay timer with 6 fuse panel gives you the ability to use equipment with the engine turned off, while insuring the battery will still have enough power to start the vehicle.
- DC Input Voltage Range: 10.5-13.8 V
- Connections: +/- and ignition wires, battery/output, spade terminals
- Maximum Continuous Amperage: 90 A
- Maximum Intermittent Amperage: 90 A
- Ground Polarity: Positive
- Isolated: Yes
- Spike Protection: No
- Item Height: 1.375 in
- Item Width: 3 in
- Depth: 4.25
- Delay Time: From 15 seconds to 8 hours