Solid Signal > Commercial Equipment > Racks and Enclosures > Tripp Lite PDUMH20HVAT


Tripp Lite 10-Outlet 16/20A 200-240V 1U Horiz Rackmount
Tripp Lite 10-Outlet 16/20A 200-240V 1U Horiz Rackmount

Click Images to Enlarge

Tripp Lite 10-Outlet 16/20A 200-240V 1U Horiz Rackmount

Brand: Tripp Lite           P\N: PDUMH20HVAT           UPC: 037332156488

No Reviews Available  Be the first to write one!


Availability: Usually Ships Same Day
Condition: New


Your Price: $505


List Price: $593.99




Qty:


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Tripp Lite Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications.

Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

Key Features
  • 200-240V 16/20A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 16A continuous)
  • Provides a redundant power option for critical networking equipment with a single input power cord
  • 2 digit display reports output power consumption in amps
  • 1U horizontal rackmount form factor; 14.8 in. / 37.6 cm depth
  • 10 outlets (8 C13, 2 C19)


Features


  • 200-240V 16/20A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 16A continuous)

  • Special Order Product. Non-Cancellable and Non-Returnable.

  • Provides a redundant power option for critical networking equipment with a single input power cord

  • 2 digit display reports output power consumption in amps

  • 1U horizontal rackmount form factor; 14.8 in. / 37.6 cm depth

  • 10 outlets (8 C13, 2 C19)

  • Set of two C20 inlets support connection to separate PRIMARY and SECONDARY power sources

  • Two 12ft / 3.6m C19 to C20 power cables included

  • ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable

  • ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time)

  • Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported

  • On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source

  • Super-fast switchover between primary and secondary power sources occurs in 2-5 milliseconds

  • Built-in card slot supports optional SNMPWEBCARD or WEBCARDLX for permanent upgrade to a switched & monitored PDU system

  • Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup

  • Front panel LEDs confirm power availability on both input lines



Discuss





RELATED SEARCHES







Product Reviews for Tripp Lite 10-Outlet 16/20A 200-240V 1U Horiz Rackmount


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



  RELATED PRODUCTS
Related Products
B019-000 The Tripp Lite B019-000 rackmount kit allows the mounting ...
The B020-U08-19-IP Console KVM Switch with built-in IP access allows ...
B021-000-17 Tripp Lite's B021-000-17 1U Rackmount Console features an integrated ...


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2020 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail