Availability: Usually Ships Same Day Condition:New
Your Price: $432710
List Price: $7,900.00
The SB-5688CAP by ShinyBow is professional 8x8 matrix routing switch with PoH. It supports 8 HDMI and 8 auxiliary audio Inputs. Supported outputs include 8 HDMI, 8 SPDIF and 8 HDBaseT (PoH). The SB-5688CAP is based on the HDBaseT standard and supports full resolution HDMI video with embedded EDID and PoH function, Audio, RS-232, Ethernet and bi-directional IR, all over a single category cable. With a signal bandwidth of 340Mhz, so there is no signal degradation. High Definition Digital signals can be selected and distributed to any 8 inputs to 16 outputs simultaneously (channel outputs mirrored). The switcher is certified as being fully CEC, ARC and HDCP 2.0 compliant, full HD 4K2K HDMI V1.4a 3D formats, data rates up to 6.75Gbps. Supports UXGA/WUXGA/DVI 1920x1200 resolutions to any HD displays.
8 HDMI with Auxiliary Audio (Analog Audio) player devices matrix switched to 8 HDMI with S/PDIF outputs and 8 HDBaseT™ Transmitter with PoH output to 8 destinations
Application HDBaseT specification with PoH 48VDC, IR, RS-232, Multi Audio Format and HD
Video Signals over one CATx (6/6a/7) category cable
HDMI digital video w/ embedded HDCP, DVI format and CEC/HDCP 2.0 compliant
Worldwide control EDID modes for HDMI full 4K2K (24/30 Hz) HD video resolutions
Link speeds of up to 6.75Gbps (link clock rate of 340MbHz), Supports HDMI 4K2K, 1.4a 3D formats
Wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV
The SB-5688CAP has1x HDMI and Auxiliary Audio (analog stereo audio) connector for input, effectively making this an 8 in by 16 out switcher (same signal on both outputs). Using IR remote the switcher’s HDBaseT™ Extender Transmitter (Tx) allows you to connect a source in a remote location. Likewise, the HDBaseT™ output and our HDBaseT™ Receiver allows you to connect a display in a remote location. The EDID management can be selected between 7 different modes. Control is provided via front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control (Windows only).
Works with Tripp Lite's B126-Series receivers to share multiple HDMI
sources between multiple monitors, each on a single Cat5e/6 cable, up to 175 ft. away. Ideal for digital signs, trade shows, retail and presentations. Key Features Routes any source ...
This unit consists of HTX-8800-U HDMI Switcher and 1xHTX-Rx Receiver.
Perfectly suited for a control room, board room, or family room, the HTX-8800-U performs world-class HDMI to HDBaseT™ matrix switching with Ultra HD/4K, HDCP v2.2 and POE support. The ...
Kramer HighSecLabs Secure 2-Port/Small Form Factor KM Switch
The K302 is a secure 2-port, small-form-factor KM switch. It
allows an easy yet secure sharing of keyboard and mouse between two different security-level sources/computers. HSL Virtual Display Technology (VDT) allows the K302 to switch seamlessly between computers once ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).