DBS signals originating from a video server are shared on a coax MoCA network. IP and CATV signals may also be needed on the coax network. Diplexers provide frequency selective splitting or combining for signal INTEGRATION or ISOLATION with minimal insertion loss. Used in reverse, a single input may be split to multiple frequency band outputs. SONORA multiplexers are for specific MoCA bands. Check with your sales representative to identify the model required for your application. Inner carton of 20.
Here are available downloads related to this product:
Signal Samplers are non-directional taps for sampling RF signals from
the main transmission line, with minimal effect to the power level of the signals on the main line. The sampled port can be connected to Spectrum Analyzer for analysis ...
CommScope series of Tappers unevenly split high power cellular signals
in fixed ratios from 1000:1 to 2:1 with minimal reflections or loss over the key wireless bands. The innovative asymmetric design ensures an excellent input VSWR and coupling flatness ...
Eagle Aspen Single Port Power Passive Diplexer (500249)
This Eagle Aspen single-port power-passive diplexer is used for combing
and separating antenna TV, cable signals, and satellite signals on a single coax cable run. This single-port passive diplexer works for the vast majority of situations at both the ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).