Use this Non-Penetrating Roof Mount Base to safety and securely install satellite and TV antennas on flat roofs where drilling holes isn’t an option. The heavy-duty steel base consists of (6) pieces of equal length which can be assembled from 35.5” x 35.5” up to 36” x 36” for a wide-set, sturdy base – the perfect size for the concrete blocks needed for ballast (not included). Additionally, the (4) struts of the unit are 22.5” in length. Once placed and weighed down, simply add a mast (sold separately links below) and attach your antenna/dish of choice.
Made of weather-resistant steel for long life in areas where you don't want to drill into a surface
Great for temporary installations
Mount a satellite dish or antenna without drilling holes into roof
Includes all necessary hardware
Supports masts up to 2” in diameter
The braces are 22.5 inches long (from bend) - The hole to secure the brace to the mast is 22" on center
Uses standard grade # 2 bolts
Requires concrete block ballast to properly weigh it down
Manufacturers may vary
Mast is NOT included - but can be found here:
1-1/4" O.D. Mast suitable for TV antenna, radio, and wireless internet SKY32817A
1-5/8" Mast suitable for older DIRECTV and DISH satellite dishes SKY32817B
2" Mast suitable for Super DISH and newer DIRECTV satellite dishes SKY32817C
Here are available downloads related to this product:
Product Reviews for Solid Signal Non-Penetrating Roof Mount for Antennas and Dishes (SKY32816)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (1 reviews):
Recent Review: Mike W. - O'Fallon, MO - 9/15/2014 It Took Some Doing To Put it Together I Did Not Find Any Instructions On How To Put It Together. I Had To Look It Up To See The Diagram of The Photo
It Took Some Doing To Put it Together I Did Not Find Any Instructions On How To Put It Together. I Had To Look It Up To See The Diagram of The Photo Mike W. - O';Fallon, MO - 9/15/2014 9:37:58 AM Once I Got It Put Together It Is Sturdy As A Rock.
ROHN Non-penetrating roof mount for wireless cable, DBS, or TV
antennas. Mast is 2.25"OD and 60" tall. Designed for concrete block ballast 36" square. The manufacturer warranty is 1 year. Special Order Non-Cancellable and Non-Returnable
Rohn Non-Penetrating Roof Mount with Mast (FRM238HC)
The FRM is a non-penetrating roof mount and also a ballast roof
mount offering 30” mast with 2-3/8” OD. The base of the ballast roof mount is 34-3/4” square with trays to fit the concrete blocks, for ballast mount. The FRM roof mount is hot dip galvanized ...
An adjustable gable end antenna mount. The PERFECT Mount is
designed to provide excellent support for off-air or wireless cable antennas, utilizing mast clamps capable of supporting up to 1-1/2" masts. The mount is easily installed on the gable ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).