Solid Signal > Tools and Installer Supplies > Diplexers and Taps > Toner Cable TGT2
These multiport, indoor/outdoor directional coupled taps are the most recent state of the art design, and feature our patented circuit design and surface mount technology. These taps feature our unique dual tongue and groove cover installation to maintain better than -100 dB RFI integrity which minimizes or eliminates RF ingress or leakage. The housings are then further epoxy sealed to prevent any moisture absorption. The housings are zinc diecast with Tin Nickel plating for superior corrosion protection.
Available in 2, 4, and 8 port configurations with standard 3dB tap value spacing for optimum system design. The 2 and 4-port models both use a small 1 3/4" x 1 3/4" housing and the 8-port model uses a 1 3/4" x 3 7/8" housing. These small sizes allow the taps to be installed in the tightest of locations. Each housing incorporates integral mounting slots and ground blocks for convenience. The taps have “F” ports for input and output, as well as for the tap ports. Tap ports are on 7/8" centers to allow for trap and filter installation. Available in 4T, 8, 11, 14, 17, 20, 23, 26, 29 and 32 values.
5 to 1000 MHz Bandwidth
RFI greater than -100 dB
75 Ω Impedance
Port to Port Isolation 23 dB minimum
Return Loss 20 dB typical, 18 dB minimum
- 5 to 1000 MHz Bandwidth
- RFI greater than -100 dB
- 75Ω Impedance
- Port to Port Isolation 23 dB minimum
- Return Loss 20 dB typical, 18 dB minimum
- Available in 4T,8,11,14,17,20,23,26,29 & 32 values
Here are available downloads related to this product:
You May Also Consider
Product Reviews for Toner Cable Two-Port 1 GHz Taps (TGT2)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!