Calrads small and innovative HDMI Plus IR over single Cat 5e/6 cable solution is specifically designed to deliver pristine digital signals from all HDTV formats and signal sources from 480p to 1080p. This balun system is a perfect solution for replacing costly standard HDMI cables that are difficult to route thru walls and cabinets. One Cat 5e/6 wire using RJ45 terminations deliver digital & IR signals from the transmitter to the receiver. A small class 2 power supply may be required at the receiver side if power from the HDMI source is not sufficient. Please note that only Cat6 cable delivers 3D signals.
- Allows HDMI Audio/Video signals to be transmitted over single Cat5e or Cat6 cables
- Extends 1080p resolution up to 100 feet over Cat5e cables (150 feet over Cat6)
- Supports Full HD 1080p/60Hz and 3D (3D with Cat6 only)
- Plasma friendly IR control system
- HDCP Compliant and is a FCC and UL approved device
The Calrad HDMI plus IR over single Cat 5e/6 cable is capable of
transmitting IR signals over the UTP cables. This balun system is plasma
friendly and can control the source from the display. This is
accomplished by using a IR Receiver and attaching it at a location
around your TV and connecting a IR Flashing Emitter attached to the
source. Both the IR Receiver and Emitter are included.
Some distances may vary and are dependent on manufactures individual
HDMI specifications. All products should be fully tested prior to
committing to a Cat 5e/6 solution and sealing long runs of cables inside
walls, possibly compromising your installation.