Solid Signal > Tools and Installer Supplies > Wall Plates and Surface Mount Boxes > Kramer Electronics WP-571-W
The WP-571 is a DGKat™ wall plate transmitter for HDMI signals. The WP-571 converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a WP-572. The twisted pair transmitter wall plate uses DGKat™ signal integration for converting TMDS as well as control and communication to signals that run over twisted pair cables. It is HDTV compatible and HDCP compliant.
The active wall plate transmitter requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat623 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges.
- HDTV compatible and HDCP compliant
- DGKat™ signal integration
- 3D Pass-Through and EDID PassThru
- A single connection to the transmitter powers receiver with Power Connect™ system
- HDMI support
You May Also Consider
Product Reviews for Kramer White Active Wall Plate HDMI Over Twisted Pair Transmitter (WP-571-W)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!