Solid Signal > Tools and Installer Supplies > Wall Plates and Surface Mount Boxes > Kramer Electronics WP-572-W
The WP-572 is a DGKat™ twisted pair receiver active wall plate that converts the twisted pair signal back to an HDMI signal with a maximum data rate of 4.95Gbps (1.65 Gbps per graphic channel). It is HDTV compatible and HDCP compliant. The twisted pair receiver uses DGKat™ signal integration for converting TMDS as well as control and communication to signals that run over twisted pair cables. Pair with the WP-571 transmitter for optimum performance.
The active wall plate receiver requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat623 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges.
- HDTV compatible and HDCP compliant
- DGKat™ signal integration
- 3D Pass-Through and EDID PassThru
- A single connection to the transmitter powers receiver with Power Connect™ system
- HDMI support
You May Also Consider
Product Reviews for Kramer White Active Wall Plate HDMI Over Twisted Pair Receiver (WP-572-W)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!