Zinwell Multiswitch

This kit has everything you need to get 16 outputs just like the MS6X16WB from your DIRECTV AU9-S SL3 or SL5 Dishes. (2) Zinwell WB68 Multiswitches (4) Wide band splitters (8) RG6 Jumper cables Multiswitches are powered by the receiver no power supply necessary Wideband frequency multiswitch 250-750 Mhz 950-1450 Mhz 1650-2150 Mhz To be used with AT9 or AU9-S SL3 SL5 (non-swm) KaKu DIRECTV satellite dishes Compatible with all DIRECTV receivers Flex Port 1 ...

This is the proper multiswitch to use for an installation that does not need whole-home service. It provides up to 8 tuner support and will handle signals from all five DIRECTV satellite locations (99 101 103 110 119) as well as MPEG-2 and MPEG-4 signals and KaKu band signals. Installations for whole-home service should use the SWM-8. nbsp6x8 multiswitch designed to interface with 99101103110119 DIRECTV satellites. To be used with DIRECTV AT9 KaKu satellite dish ...

Split your signal from a standard dual LNB DIRECTV dish into 4 outputs. Unit also has input for off-aircable input. Zinwell sam3402 3x4 Multi-Switch Frequency 40-2050 Mhz Optional OFF-AIR (UHFVHF) or cable input Diplexers at the recevier end are not required if not using the optional OFF-AIR (UHFVHF) or cable input Compatible with standard RG-6 coax cable May be substituted with Perfect Vision 3x4 Eagle Aspen DTV 3x4 or the Zinwell 3x4 with weatherboots depending ...

This Eagle Aspen 3x4 multiswitch splits your signal from a standard dual LNB DIRECTV dish into four outputs. This allows you to expand your DIRECTV to four receiver tuners. This unit also has an input for off-aircable input. As a DIRECTV Authorized Dealer Solid Signal has this Eagle Aspen DIRECTV-approved 3x4 multiswitch with weather boots and other satellite TV products you need to enjoy satellite TV programming. Key Features Frequency 40-2050 Mhz Compatible with standard ...