Altelix NF141208VFHA1C-85 - 14x12x8 Fiberglass Vented & Heated Weatherproof NEMA Enclosure with 120 VAC Outlets & Power Cord, 200W Heater & 85°F Turn-On Cooling Fan

Altelix 14 x 12 x 8 Heated and 85°F Fan-Cooled Weatherproof Enclosure (NF141208VFHA1C-85)

Best For

Rapid-deployment outdoor electronics, Wi-Fi, SCADA, security, IoT, and control installations that need plug-in 120VAC power plus thermostatically controlled heating and lower-temperature fan cooling.

Why Choose the Altelix NF141208VFHA1C-85?

This fiberglass-reinforced polyester enclosure arrives with a five-foot three-prong power cord, four pre-wired 120VAC outlets, a 200W heater, an 85°F turn-on cooling fan, and an aluminum equipment plate. It can be deployed using the power cord and later converted to hard-wired power by a qualified installer.

Key Benefits

• NEMA Type 3R/3RX and IP24 rated
• 14 x 12 x 8 in. nominal enclosure size with extended lid
• Thermostat-controlled 200W heater
• Cooling fan turns on at approximately 85°F (30°C)
• Two 4-inch vents with rain shields and screens
• Pre-wired 5-foot three-prong power cord
• Four pre-wired 120VAC outlets
• Aluminum equipment mounting plate
• UV-stable, corrosion-resistant fiberglass-reinforced polyester construction
• RF-transparent and non-conductive enclosure material
• Cable glands and stainless-steel mounting feet included

Who Should Buy the NF141208VFHA1C-85?

Installers who need a powered outdoor enclosure with both cold-weather heating and fan cooling that begins at a lower 85°F internal temperature.

Thermostat Operation

The cooling fan turns on at approximately 85°F (30°C) and off at 59°F (15°C). The 200W heater turns on at approximately 43°F (6°C) and off at 59°F (15°C).

Installation Notes

The power cord can be removed for hard-wiring using the quick-connect terminal arrangement by a qualified installer. Optional pole-mount kits include NMKS-300-08 painted steel and NMKX-300-08 stainless steel. The existing product notice identifies this item as non-cancellable and non-returnable.