Altelix NF162012VA1C-RV2U - 16x20x12 Fiberglass Weatherproof Vented NEMA Enclosure with 19" Wide 2U Vertical Rack Frame, 120V Outlets & Power Cord

Altelix NF162012VA1C-RV2U 16x20x12 Fiberglass Weatherproof Vented NEMA Enclosure with 19" Wide 2U Vertical Rack Frame, 120V Outlets & Power Cord

Best For

The Altelix NF162012VA1C-RV2U is a vented 16x20x12 fiberglass NEMA enclosure with a standard 19" 2U vertical equipment rack and plug and play power.

Why Choose the NF162012VA1C-RV2U?

Two 4 inch air vents covered by rain shields with cleanable screens help expel heat from the installed equipment. The enclosure is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Two pre-wired 120VAC power outlets inside the enclosure provide power to your equipment.

The enclosure is molded from durable, UV resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. The FRP is dent-proof, non-conductive and RF transparent for compatibility with wireless equipment, and the installer can drill and modify it as needed. Improved stainless steel hinges with high quality 316 steel hinge pins provide lasting durability in even the harshest coastal conditions, and the gasketed door includes stainless steel quick release latches with padlock hasps.

Key Benefits

• Standard 19" 2U vertical equipment rack for network switches, rack mount audio/video equipment and other rack mountable gear.
• Rack frame mounts to a 2.0mm thick aluminum plate that the installer can drill and modify; two mounting positions fit a range of equipment sizes.
• Two 4 inch air vents with rain shields and cleanable screens help expel heat.
• No wiring required: plug the pre-wired 5 foot power cord into a nearby outlet.
• Two pre-wired 120VAC power outlets.
• Gasketed door with stainless steel quick release latches and padlock hasps.

Who Should Buy the NF162012VA1C-RV2U?

This enclosure suits anyone who needs a ventilated, ready-to-plug-in weatherproof home for a small amount of rack mountable equipment.

Internal 2U 19" Vertical Equipment Rack

The standard 19" 2U vertical equipment rack accommodates a wide range of equipment. The rack frame mounts to a 2.0mm thick aluminum plate, which can also be drilled and modified by the installer to unique site requirements. Two mounting positions for the rack are provided to accommodate a wide range of equipment sizes.

Installation Note: The max. depth of the 2U rack is 9.6" (244mm). Before ordering please check the dimensions of the equipment to be installed to ensure proper fit.

Cable Glands

The enclosure features unique PG-16 cable glands with a closed inner seal, installed in the open ports to maintain the NEMA rating when not in use. When required, punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.

Mounting

Stainless steel brackets are included for secure wall mounting. Optional flange and pole mounting kits are available.

Customization

Altelix offers custom enclosures for WiFi equipment, DIN mount industrial controls, telephone call boxes, IP phones, security and safety, building automation and more. Options include equipment mounting plates, DIN rails, AC/DC power, vents, cooling fans and heaters, plus full customization, engineering and on-site CNC machining, all with quick turnaround time. Please contact us with your unique requirements.

Learn More

Interested in learning more about this product? Check out our blog!