Altelix Vented Weatherproof Enclosure for Amazon eero® PoE 6 Wi-Fi 6 Access Point

The Altelix Vented Amazon eero® PoE 6 Enclosure is a weatherproof enclosure designed to provide indoor or outdoor protection for the Amazon eero® PoE 6 Wi-Fi 6 access point. This non-powered enclosure is ideal for installations powering the Amazon eero® PoE 6 via PoE only.

Easy Setup
The equipment mounting plate of the NP14VM-EER5 is pre-drilled to except the wall mounting bracket that is included with the Amazon eero® PoE 6. Simply attach the wall mounting bracket to the plate and then install the access point. Once the PoE 6 is securely mounted inside the enclosure, special cable glands on the enclosure will allow pre-terminated Ethernet cables to be connected to the access point.

Install Your PoE 6 Access Point Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock. Two 3" inch air vents with rain shields and screens provide ventilation for the Amazon eero® PoE 6. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.

RF Transparent Design
The non-metallic design of the enclosure and equipment mounting plate is RF transparent and will not interfere with the WiFi signal range or coverage pattern.

Mounting
The NP17VM-EER5 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.

Additional Enclosures for Amazon eero® Wireless Equipment
In addition to this enclosure, Altelix has enclosures for a wide range of Amazon eero® wireless access points and extenders.

eero® is a trademark or registered trademark of Amazon Technologies, Inc.

Features

• Designed to fit the Amazon eero® PoE 6 (Model T010001) Wi-Fi 6 Access Point
• Two 3" vents with rain shields and screens
• ABS + Polycarbonate Enclosure
• Gasketed Lid with Tamper-Proof Locking Screw
• Dual Door Latches
• RF transparent design will not affect wireless signal range or coverage pattern
• NEMA Type 3R, 3RX / IP24 Rated
• Includes Wall Mount Hardware and Cable Grommets

Applications

• Designed for use with Amazon eero® PoE 6 Wi-Fi 6 Access Point - Model T010001
• Outdoor wireless network installations
• Protection of access point from theft or damage
• Concealment of equipment
• Deployment of hospitality wireless networks
• Retail and commercial wireless networks
• PoE installations