Altelix NP12GYVE1-YLK1 - Weatherproof PoE Enclosure for YoLink® Hub

Altelix Vented Weatherproof PoE Enclosure for YoLink® Hub

Power-over-Ethernet Solution for the YoLink® Hub

Now you can power your YoLink® Hub with a single Ethernet cable while providing added security from vandalism and protection from harsh environments.

Eliminate Running Multiple Cables
This enclosure features an internal PoE splitter which allows the YoLink® Hub to receive it's power and data from a single Ethernet cable. This eliminates the need for an AC outlet at the enclosure location. Using a separate PoE network router or switch, power is injected onto the Ethernet cable which is then connected to the PoE splitter inside the enclosure. From the splitter, separate data and power leads are connected to the YoLink® Hub. This is ideal for remote locations where power is not available.

RF Transparent Design Will Not Effect LoRa Signal
The YoLink® Hub enclosure is designed to be RF transparent. Components such as the enclosure itself, the YoLink® Hub mounting cradle and the equipment mounting plate will not affect the LoRa signal range or coverage pattern. One of the advantages of mounting the YoLink Hub in an enclosure outdoors is maximizing range for long range sensors and overcoming the signal loss from concrete or metal buildings.

Install Your YoLink® Hub Securely
This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. Two 2¼" inch air vents with rain shields and screens provide ventilation for the YoLink® Hub. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.

Complete with Cable Grommets and Glands and Wire Management Straps
For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.

Mounting
The external mounting feet on the NP12VE1-YLK allows it to be easily wall mounted with the included hardware. For added security, mounting the enclosure using the internal mount feet can prevent the enclosure from being removed when locked. A pole mounting kit is also available for this enclosure. The NMKG-150-08 attaches to the rear of the enclosure and allows it to be mounted to poles and fence posts up to 9.5 inches in diameter.

Features

• Designed for the YoLink® Hub (Model YS1603-UC)
• Internal Power-over-Ethernet (PoE) Splitter allows the YoLink® Hub to receive power and data from a single Ethernet cable
• Plug-and-Play design, easy to install
• Two (2) 2¼" vents with rain shields and screens
• RF transparent design will not affect LoRa signal range or coverage pattern
• Includes cable glands and grommets zip ties, cable management straps and wall mounting hardware
• Meets NEMA 3R, 3RX and IP24
• Weatherproof and UV stable
• Durable polycarbonate + ABS
• Gasketed lid with tamper-proof locking screw and key and provision for padlock
• Integral mounting feet, optional pole mount kit available

Applications

• Protection of the YoLink® from water and dust, physical impact and vandalism
• Indoor or outdoor installations
• Concealment of equipment
• Maximizing range for long range sensors

YoLink® is a trademark or registered trademark of YoSmart, Inc.