• Home
  • Altelix NP14GYVP-UBQ2 - Vented Weatherproof Enclosure for Ubiquiti UniFi® Access Hub UA-Hub

Altelix NP14GYVP-UBQ2 - Vented Weatherproof Enclosure for Ubiquiti UniFi® Access Hub UA-Hub

  • Brand: Altelix
  • P\N: NP14GYVP-UBQ2
(0)No Reviews yet

Availability: In Stock


Special Note: This item is Non-Cancellable and Non-Returnable


Your Price: $214.99

Do you have questions?

Please contact our experts for assistance.

Description

Description

Altelix Vented Weatherproof Enclosure for Ubiquiti UniFi® Access Hub UA-Hub

The Altelix Vented Access Hub Enclosure is a weatherproof enclosure designed to provide indoor or outdoor protection from weather or tampering for the Ubiquiti Unifi® UA-Hub Access Hub. 

Install Your Access Hub Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock. Two 3" inch air vents with rain shields and screens provide ventilation for the Ubiquiti Unifi® Access Hub. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.

Easy Setup
The PVC equipment mounting plate of the NP14VP-UBQ2 features a pre-installed 35mm top hat DIN rail for mounting the Ubiquiti Unifi® UA-Hub. Special cable glands on the enclosure will allow a terminated Ethernet cable to be connected to the access hub.

Mounting
The NP14VP-UBQ2 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.

Additional Enclosures for Ubiquiti® Wireless Equipment
In addition to this enclosure, Altelix has enclosures for a wide range of Ubiquiti® products including wireless access points and extenders. 

Ubiquiti UniFi® is a trademark or registered trademark of Ubiquiti Networks, Inc.

Features

  • Designed to fit the Ubiquiti Unifi® Access Hub UA-HUB
  • Two 3" vents with rain shields and screens
  • ABS + Polycarbonate construction
  • Gasketed lid with tamper-proof locking screw
  • Dual door latches
  • Features a PVC equipment mounting plate with 35mm top hat DIN rail
  • NEMA Type 3R, 3RX / IP24 rated
  • Includes wall mount hardware, cable glands and grommets

Applications

  • Networked single door controller
  • Secure building access systems
  • Security gate control systems
  • Outdoor installations
  • Protection of access hub from theft or damage
  • Concealment of equipment

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Reviews

No reviews available

Be the first to Write a Review