Altelix NP14GYVM-UBQ-01 - Vented Weatherproof Enclosure for Ubiquiti UniFi® nanoHD Access Point

Altelix Vented Weatherproof Enclosure for Ubiquiti UniFi® nanoHD Access Point

The Altelix Vented nanoHD Enclosure is a weatherproof enclosure designed to provide indoor or outdoor protection for the Ubiquiti Unifi® nanoHD access point. This non-powered enclosure is ideal for installations powering the Ubiquiti Unifi® nanoHD via PoE only.

Install Your nanoHD Access Point Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock. Two 3" inch air vents with rain shields and screens provide ventilation for the Ubiquiti Unifi® nanoHD. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.

Easy Setup
The equipment mounting plate of the NP14VM-UBQ-01 is pre-drilled to except the mounting bracket that comes with the Ubiquiti UniFi® nanoHD. Simply attach the mounting bracket to the plate and then install the access point. Once the nanoHD is securely mounted inside the enclosure, a special cable gland on the enclosure will allow a terminated Ethernet cable to be connected to the access point.

RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.

Mounting
The NP14VM-UBQ-01 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.

Additional Enclosures for Ubiquiti® Wireless Equipment
In addition to this enclosure, Altelix has enclosure for a wide range of Ubiquiti® wireless access points and extenders. 

Ubiquiti UniFi® is a trademark or registered trademark of Ubiquiti Networks, Inc.

Features

• Designed to fit the Ubiquiti Unifi® nanoHD Access Point
• Two 3" vents with rain shields and screens
• ABS + Polycarbonate Enclosure
• Gasketed Lid with Tamper-Proof Locking Screw
• Dual Door Latches
• RF transparent design will not affect wireless signal range or coverage pattern
• NEMA Type 3R, 3RX / IP24 Rated
• Includes Access Point Removal Tool, Wall Mount Hardware and Cable Grommets

Applications

• Outdoor Wireless Network Installations
• Protection of Access Point from Theft or Damage
• Concealment of Equipment
• Deployment of Hospitality Wireless Networks
• Retail and Commercial Wireless Networks
• PoE Installations