TYCON POWER SYSTEMS UPS-PL12-36-120 UPSPRO 100W 430VA 12V 36AH SOLAR

Features
Weatherproof, UV resistant, outdoor enclosures
Powered from AC mains power and/or Solar
Interior space for customer electronics
Wall or Pole Mounting
Isolates Customer Equipment from Power Line Surges
High Quality AGM Sealed Lead Acid Batteries
Advanced battery charge controller protects against overcharge and over discharge

The UPSPro® 120W series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered from 120/240VAC. It is also solar ready so a solar panel can be added as an alternate power source or to extend backup time. Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

There is some space inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line surges which isa main cause of outdoor equipment failure.

A typical 250mW wireless access point with average power consumption of 4W will run 24 hours on a 9Ah battery at room temperature or 16 hours at -20 deg C

KEY FEATURES:

• UPSPro Outdoor Backup Power
• 12V 20A Unregulated Output
• 120/240VAC Input
• Polycarbonate Enclosure
• 12V 36Ah Battery