Easy Up Heavy-Duty Pole-to-Pole Mount for 1 in. to 2 in. OD (EZ-HD-PTP-8)

Worked as described. We used two to connect a 5 foot antenna pole to the old Dish satellite mast.

I brought this because I had a round DirecTV round dish on my roof. Or so I thought. My plan was to slip a 2" OD 7' mast over its mast and drill holes and put in machine screws, but I decided that perhaps I should also use the OE Clearstream 4V mast beside it and clamp them together using this (BTW the 4V will NOT accept a 2" mast with the OE square bend U-bolts; I had to use carriage bolts). I don't climb because of balance issues and when the guy tried to do it, turned out was an oval Slimline dish and the mast on it was 2", so he used this to tie them together. He said it seemed solid and so far it seems fine and doesn't move. To clarify the description, either pole can be between 1" and 2" OD.

Product worked as advertised and made installing an antenna and mast to an existing yard satellite pole easy and secure.

Used with 2" 32" pole to attach starlink gen 3 antenna pole mount to my 1.25" antenna mast. Solid signal suggested this solution, worked like a charm! the Gen3 starlink antenna pole mount wants a 2+" pole to mount to.

Great. I used these to strengthen a section of 1 in. pole with another 1 in. pole beside it.

Perfect. Just what I needed for my Pipe to Pipe connection

This mount was the clear ticket for my application. It's so adjustable that you can make almost anything work for you and especially if it is not a standard mount your working.

This adjusts to two different pipe sizes very well. I used it to install a Dish satellite & it looks & holds well. I would suggest the threaded bolts be heavier to avoid any slight twisting under weight. Great product that solves the problem.

Nice heavy hardware, a little pricey with shipping

I am using three of these clamps to connect a 30’ Rohn push-up mast to a cemented ground mounting pipe. These clamps hold the mast firmly. I am very pleased with this product.