Easy Up Y-Style Antenna Mast Wall Mount 24-Inch Standoff (EZ 30-24)

Just finished to install my antenna those brackets are perfect and to the exact size

Very good quality suited my need great

This is a decent price and worked very well for my purpose. The angle these are set at upon arrival is about 19.5 inches side to side hole to hole. I actually bent them inward to 16" to be able to put both in wall studs on the outside of the home. This is very easy to do and I just bent the angle point of the hole area so it would mount flush after bending to get the 16" width distance. Bolts are way longer than necessary and I wish they were hex head instead of phillips head to tighten easier. These could be vastly improved if they were automatically set for a 32" width for bolting them up to hit the wall studs, but if you could get this distance doing this with these the 24" stand off would be vastly shortened, but I would have rather done that then shorten the width as this takes some strength away from the support. I had 21 inches it had to come out to clear my overhang and these worked very well. I would put up pictures but this review don't allow this.

The part was here on time and it was very nice ,perfect just what i neede for my project.

After getting a new roof, I decided not to reinstall my antenna on top of the new shingles. To get to the same (or a bit higher) height, I decided on a mast rather than a tower. These mounts keep the bottom of the mast securely attached to the wall of our house. The bottom of the two mounts has a brace to keep it from twisting. I wanted as much support as possible, so I made a brace for the top mount using a leg from the tripod used for the rook mounted mast. Since the mast is 25 feet high and is held straight using guy wires, I felt the extra bracing would help, especially since the mast is being held two feet off the wall of our house in order to clear the eave and 4" gutters.. In any case, these are solidly built and easy to install with a level to keep the legs horizontal. I uses a section of mast pole to align the bottom brace to the top brace while installing it. The final installation is solid and holds holds the bottom of the mast securely.

It seems like it built very strong. very easy to put together. they have the best price I found online. pulse close to home for the purchase. plus pick up order. molly was very great to help me to do an order pick up over the phone.

Exactly as advertised

Worked as described brackets