DISH MT2 TV Antenna Integration Module (ES162303)
- Brand: DISH Network
- P\N: ES162303
- UPC: 753960010601
Do you have questions?
Please contact our experts for assistance.
Reviews
33 reviews
Completely Satisfied
by G
I wanted to save that $12 monthly charge for free local digital channels and had the specified Dish receiver to use with the MT2 module. After speaking with a Dish technician, I gave it a shot. Fast shipping, easy instructions and installation and works exactly as expected, great. Dropped that $12! Thank you.
Works as expected
by Mick
Unplugged my 722, removed two screws, removed the blank plate, insterted the module, re-installed the screws, plugged in the receiver and ran the locals set-up option. Now I have OTA channels in my guide and they're recordable. Just like I expected.
Enlightened. I was unaware of this product. Had been paying Dish $12 per month for years for access to local over the air channels. Easy to install and I've reduced my Dish bill.
by Hutch
Enlightened. I was unaware of this product. Had been paying Dish $12 per month for years for access to local over the air channels. Easy to install and I've reduced my Dish bill.
Works with caveats
by CETA+
The tuner unit causes the ubiquitous Error code 0000-00-0000, if you get this error, simply pull out the tuner. Problem will be solved. New "who knows" tuner will cure problem...or leave it out.
Works Great!!
by iadubber
I ordered this from here because it was $20 cheaper than Dish Network would sell me one for. It was EASY to install and easy to setup. Im now recording 4 shows at one time with my Dish vip722k DVR.
Record 2 over-the-air and 2 satellite
by Maxworth
After upgrading to the HD package on Dish I opted for the dual receiver VIP 722k reducing my monthly bill and still giving me 2 independent DVR systems.What I became aware of was that the optional MT2 OTA (over-the-air) module would allow me to receive 2 OTA and 2 satellite programs all at the same time recording all of them.Of course you could only watch 2 programs but these could be pre
Works great
by Mark
Unplug receiver.Remove plate with 2 screws.Slide in module.Replace 2 screws.Plug back in.As easy as it gets.
works great!
by gerlock
used in satellite box to view local channels over the air.
MT2 OTA Module Does Works!
by Mike
The MT2 is easy to install.Power off the box remove the two screws from the back cover plate and insert the MT2 and reinstall the two screws.Programing is easy.One issue but not the fault of the MT2.Make sure you get a GOOD antenna.Indoor units work ok but give drop outs thru the day.Investing in a good outdoor antenna soon.
Dish Network MT2 OAM (Over the Air Modul
by rickytickytovee
Easy to use.Turn off DVR.Unscrew metal plate from the back of the unit where this module will go in.Push it it screw it down.