Seaview Complete Spreader Kit for M2 Radar or SatDome Mounts (SP2-MOD)

This three-piece kit consists of a midsection and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that is on the mount. All of the wiring from the GPS unit or antenna can be routed internally through the spreaders and into the mount. This helps with security and makes for a clean installation. The parts in the kit are bolted together with rubber gaskets in between each part to prevent water intrusion.
There are two ways to configure the spreader kit, one for a closed dome and one for a satdome. When using the spreader kit with a closed dome you want to raise the GPS units above the closed dome radar to avoid interference. If you are using it with a satdome, there is no need for the extension posts with GPS units since the satdome radio waves travel up to the sky to the satellites.
Key Features

• 3-piece kit
• For use with radar or satdome mounts ending in M2
• Eliminates interference
• Can be configured 2 different ways